To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase.          
          
          Equipped With:
             Iemca Elite 220E Magazine Bar Feed
             Tri-Mist 850 G2 Oil/Mist Collector
             Part Conveyor
             Thread Whirling Head
             Misc Collets
          
          
          General Specifications from Brochure:
          
          Control:                               Fanuc 31iTB
          No. of Controlleable Axes:             7
                                                 (X1, Z1, Y1, X2, Z2, C1, C2
          Max Bar Diameter:                      20mm (3/4")
          Max Machining Length:                  210mm (Direct Drive Rotary GB)
                                                 250 (Static Guide Bushing)
                                                 80mm (Carrier Type Rotary GB)
                                                 45mm Bushingless
          Max Drilling Diameter:                 10mm
          Max Tapping Diameter:                  M8
          Deep Hole Drilling Diameter:           8mm
          Max Back Spindle Chucking diameter:    20mm
          Max Back Spindle Drilling Diameter:    8mm
          Max Back Spindle Tapping Diameter:     M6
          Max Tool Spindle Drilling Diameter:    6mm (front tool post/back tool post)
                                                 8mm (rear tool post)
          Max Tool Spindle Slotting Diam:        30mm (T1)
          Main Spindle Speed:                    200 - 12000 rpm
          Back Spindle Speed:                    200 - 12000 rpm
          Rotary Guide Bushing:                  200 - 8000 (carrier type)
                                                 200 - 12000 (direct drive type)
          Tool Spindle Speed:                    200 - 8000 rpm
          Tool Storage Capacity (std/max):       24 pcs / 35 pcs
          Tool Size:                             12 x 12 x 100 mm
          Rapid Traverse rate:                   32 m/min 
                                                 (X1, Y1: 24 m/min)
                                                 (Y2: 15 m/min)
          Main Spindle:                          2.2 / 3.7 kW
          Back Spindle:                          1.5 / 2.2 kW
          Tool Spindle:                          0.75 / 1.1 kW (Front tool post)
                                                 1.0 kw (rear tool post)
          X1-X2-Z1-Z2-Y2 Axes                    0.5 kw
          Y1 axis:                               0.75 kW
          Lubricating Pump:                      3 W
          Power Source Requiements:              14.3 kVA
          Compressed Air Requirement:            0.4 MPa oe above
          Air Discharge rate:                    40 NL/min
          Weight (approx):                       3200 kg (7055 lbs)
          
          Dimensions (approx):                   2110 x 1200 x 1885 mm (83" x 47" x 74")
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com