To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase.         
          
          
          
          Originally interfaced to an Okuma LB-9
          
          
          GENERAL SPECIFICATIONS FOR LNS TYPE HYS 6.42 HS-4.8 BARFEED   "LNS642"
          
          CONSISTS OF SIX (6) GUIDE TUBES WITH INTERNAL DIAMETERS OF:
            1.732" FOR 1-1/2" TO 1-5/8" DIAMETER BARSTOCK
            1.575" FOR 1-1/4" TO 1-1/2" DIAMETER BARSTOCK
            1.339" FOR 1"     TO 1-1/4" DIAMETER BARSTOCK
            1.063" FOR 3/4"   TO 1"     DIAMETER BARSTOCK
            .827"  FOR 1/2"   TO 3/4"   DIAMETER BARSTOCK
            .551"  FOR 1/4"   TO 1/2"   DIAMETER BARSTOCK
          EQUIPPED WITH: 
            EACH GUIDE TUBE CONTAINS ITS OWN PUSH BAR, PISTON ASSEMBLY AND OIL
          
             RECUPERATOR 
            FRONT SUPPORT STAND WITH A 45" LONG SUPPORT ARM WITH CRUTCH FOR LOADING
          
             BARSTOCK
          SELF-CONTAINED HYDRAULIC SYSTEM AND RESERVOIR:
            ELECTRICAL CONTROL FOR 110 VOLT AC CONTROLS AND 220/460 V/3/60 
            MANUAL AND AUTOMATIC CONTROLS FOR HYDRAULIC SYSTEM ON, OFF, MANUAL
          
             ADVANCEMENT AND RETRACTION OF PISTON AND AUTOMATIC OPERATION IN CONJUNCTION
          
             WITH THE MACHINE CONTROL
          
          Bar feed:  210" x 47" x 50" 2,500 lbs
          Hydraulic Tank: 38" x 23" x 36", 250 lbs
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com