To view a video demonstration of this machine, click the link below.
https://youtu.be/B70YNMw-dVE
To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.
Equipped with (all detail must be confirmed by the buyer):
Fanuc 32iTB Dual Path Control
LNS HYS 6.32 Bar Feed
Parts Conveyor
MP Systems Coolant System (oil only system)
Mist Collection System
LNS Turbo Chip COnvetor
=================
General Machine Specifications per Manufacturer's Brochure
Number of Axes: 8 (X1,Y1,Z1,C1,X2,Y2,Z2,C2)
Chucking Barstock Diameter: 8 - 32mm (0.31 - 1.25")
Max Machining Length: 320 mm (12.59")
(w// direct Drive Rotary GB)
Max Drilling Diameter: 12 mm (.47")
Max Tapping Diameter: M10
Max Back Spindle Chucking Diameter; 32mm (1.25")
Max Back Spindle Drilling Diameter: 10mm (.39")
Max Back Spindle Tapping Diameter: M8
Max Tool Spindle Drilling Diameter: 8mm (.31")
Max Tool Spindle Tapping Diameter: M6
Max Tool Spindle Slotting Diameter: 45mm (1.77")
Main Spindle Speed: 200 - 8000 rpm
Back Spindle Speed: 200 - 8000 rpm
Rapid Traverse Rate: =32 m/min (X1,Y1,Y2 24 m/min)
Tool Storage Capacity (std/max): 31/43
Stick Tool Size: 16 x 16 x 100mm
Tooling Configuration:
Live Cross Drills: 7
OD Turning Tools: 7
ID Tools (by sub spindle: 2
ID/BW Tools: 5
BW Tools: 4 Live + 4 Fixed
Main Spindle: 3.7 / 5.5 kW
Back Spindle: 2.2 / 3.7 kW
Tool Spindle: 1.0 kW
Rotary Guide Bushing: 1.5 / 3.0 kW
X1, Y2: 0.5 kW
Y1, Z1, X2, Z2: 0.75 kW
Coolant Pump: 400 W
Lubricating Pump: 3 W
Power Requirements: 21.4 KVA
Air Requirements: 0.4 MPa or Above
Air Discharge rate: 40 NL/min
Coolant Tank Capacity: 180 L (47.5 gal)
Machine: 106" x 59" x 80" 7,500 lbs
Conveyor: 97" x 27" x 80" 800 lbs
High Pressure Coolant: 44" x 24" x 38" 750 lbs
Mist Collector: 48" x 48" x 24" 300 lbs
Barfeed: 170" x 25" x 51", 2500 lbs
Subscribe to RSS
