Includes Chucker Kit & Guide Bushing units
          
          
          Equipped with (all detail must be confirmed by the buyer):
              Fanuc 32iTB Dual Path Control
              Edge Patriot Magazine Bar Feed
                 w/ 2 channel sets, 33mm & 17mm
                 & long stroke mode for chucker kit
              Chucker Kit (3291-Y251) 
              Parts Chute
              Parts Conveyor
              MP Systems 8-line High pressure Coolant System (V2-HO8)
              TriMist 850 Mist Collection System
              Turbo Chip Conveyor, 42" discharge height, Part# 4475-8554
              (1) 3290-Y010 Rotary Driven Tool (beside the sub spindle)
              
          
          Original Cost: apprx $270,000 for this machine
          
          Approx 27000 Power on Hours
                 14150 Run Time Hours
                  7942 Cutting Time Hours
          
          
          =================
          
          General Machine Specifications per Manufacturer's Brochure
          
          Number of Axes:                            8 (X1,Y1,Z1,C1,X2,Y2,Z2,C2)
          
          Chucking Barstock Diameter:                8 - 32mm  (0.31 - 1.25")
          Max Machining Length:                      320 mm (12.59")
                                                       (w// direct Drive Rotary GB)
          Max Drilling Diameter:                     12 mm (.47")
          Max Tapping Diameter:                      M10
          Max Back Spindle Chucking Diameter;        32mm (1.25")
          Max Back Spindle Drilling Diameter:        10mm (.39")
          Max Back Spindle Tapping Diameter:         M8
          Max Tool Spindle Drilling Diameter:        8mm (.31")
          Max Tool Spindle Tapping Diameter:         M6
          Max Tool Spindle Slotting Diameter:        45mm (1.77")
          Main Spindle Speed:                        200 - 8000 rpm
          Back Spindle Speed:                        200 - 8000 rpm
          Rapid Traverse Rate:                      =32 m/min (X1,Y1,Y2 24 m/min)
          
          Tool Storage Capacity (std/max):           31/43
          Stick Tool Size:                           16 x 16 x 100mm
          Tooling Configuration:
              Live Cross Drills:                     7
              OD Turning Tools:                      7
              ID Tools (by sub spindle:              2
              ID/BW Tools:                           5
              BW Tools:                              4 Live + 4 Fixed
          
          Main Spindle:                              3.7 / 5.5 kW
          Back Spindle:                              2.2 / 3.7 kW
          Tool Spindle:                              1.0 kW
          Rotary Guide Bushing:                      1.5 / 3.0 kW
          X1, Y2:                                    0.5 kW
          Y1, Z1, X2, Z2:                            0.75 kW
          Coolant Pump:                              400 W
          Lubricating Pump:                          3 W
          
          Power Requirements:                        21.4 KVA
          Air Requirements:                          0.4 MPa or Above
          Air Discharge rate:                        40 NL/min
          Coolant Tank Capacity:                     180 L (47.5 gal)
          
          
          Machine:  106" x 59" x 80" 7,500 lbs
          Conveyor:  97" x 27" x 80" 800 lbs
          High Pressure Coolant:  44" x 24" x 38" 750 lbs
          Mist Collector:  48" x 48" x 24" 300 lbs
          Barfeed: 170" x 25" x 51", 2500 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com