0W0870
WATER TREATMENT EQUIPMENT
CREST, No. CLWS-3-STD, 2007 Closed Loop water conservation System
Ref:
404558
To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.
CREST with CLWS-3-STD......... $28,500.00 (A&M ID #404436)
CREST without CLWS-3-STD ........ $18,500.00 (A&M ID #404436)
CLWS-3-STD by itself ......... $12,500.00 (A&M ID #404558)
The following Items is over $20,000 new:
* Model CLWS-3-STD, Closed Loop Water Conservation System, System is designed
to provide DI water for final rinse of components and then recycle that water
for continuous reuse. The CLWS will reduce water usage for the cleaning
system by 90% while providing spot free rinse of parts being cleaned. System
returns water from final rinse tank to on board gravity fed heated reservoir.
Buer will rent the carbon and mixed bed bottles and this unit reprocesses at a
3-5 gpm rate the final rinse water. So instead of flowing 60 gallons of water
down the drain the CLWS saves 90% so the system is only dumping 6-10 gallons
down the sewer an hour.
Capacity: 5 gpm
Incoming Filter: 5 micron (from tap or RO source)
Reservoir: A stainless steel holding reservoir,
with liquid level controls.
Heat: 15000 watts of screw-plug immersion
heat.
Temperature control:
Includes a digital indicating temperature control.
Includes an RTD-type temperature probe.
Includes over-temperature safeties.
Transfer pump: A centrifugal pump, with a stainless steel head and
a TEFC motor.
Canister:
Canisters are NOT included.
These canisters or bottles can be leased and serviced by your local water
treatment service company such as Evoqua with two each carbon and two each
mixed Ion resin exchange
A resistivity monitor.
Sterilizing: An ultraviolet sterilizing light.
Monitors: An analog pressure gauge
Outgoing Filter: 5 micron
Power req's: 240 volts/3 phase/60 hz/43 amp
Automatics & Machinery Co Inc
150 Martin St
Longmont CO 80501-5939
Tel:
800-543-7666
Fax:
303-651-6556
Email (Request Quote):
steve@automatics.com
Web:
www.automatics.com
|