To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase.
          
          
          Equipped with:
              Edge Minuteman 320 Magazine Bar Feed
              High Pressure Coolant
              Mist Collector
              Part Conveyor 
              B-Axis
              Misc tooling, manuals, tool kit
          
          
          General Specifications from the Manufacurer's Brochure:
          
          Control:                               Fanuc 31iTB5
          Axes:                                  X1,Y1,Z1,C1,B,X2,Y2,Z2,C2
          Max.machining diameter                 20mm (25/32in)
          Max.headstock stroke                   
              Standard                           205mm (8in)
              Non-guide bush type                Bar diameterx2.5 (max.50mm)
                                                  (max.1-31/32in)
          Turning tools                          5 tools on the front + 2 tools on the
          
                                                 rear(12mm)
          4-Spindle sleeve holder                
              Number of tools                    Front 4 tools
                                                 Rear 2 tools (Max.4 tools)
              Max.drilling capability            12mm (1/2in)
              Max.tapping capability             M10xP1.5
          Power-driven att.                      
              Number of tools                    Cross milling 3 tools
                                                 Cartridge type At 2 position
              Number of tools [type A]           Adjustable angle power-driven tool
                                                 At 1 position(Front 3 tools+Rear 3
          
                                                 tools)
              Number of tools [type B]           Power-driven tool with B axis
                                                 At 1 position(Front 3 tools+Rear 3
          
                                                 tools)
              Max.drilling capability            10mm (25/64in)
              Max.tapping capability             M8xP1.25
          Rapid feed rate                        35m/min(X1,X2,Y1,Z1,Z2) 15m/min(Y2)
                                                 198,000/min(C)
                                                 27,000/min(B):typeB only
          Main spindle indexing angle            C-axis control
          Main spindle speed                     max.10,000min-1
          Main spindle motor                     Built-in motor drive
                                                 2.2kw(continuous)/3.7kw(10min/25%ED)
          Double sleeve holder for deep hole     
              Number of tools                    2 tools (by sub spindle)
              Max.drilling capability            10mm (25/64in)
              Max.depth of hole                  100mm (3-15/16in)
          Power-driven att. spindle speed        max.8,000min-1
          Power-driven att. drive motor          2.2kw
          
          Backworking Attachment Specifications
          
          Max.chucking diameter                  20mm (25/32in) 
          Max.length for front ejection          80mm (3-5/32in)
          Max.work projection length             30mm (1-3/16in)
          8-spindle backworking unit             
              Number of tools                    8 tools
              Max.drilling capability            Stationary tool12mm (1/2in)
                                                 Power-driven tool6mm (15/64in)
              Max.tapping capability             Stationary toolM10xP1.5
                                                 Power-driven toolM5xP0.8
          Sub spindle indexing angle             C-axis control
          Sub spindle speed                      max.10,000min-1
          Sub spindle motor                      Built-in motor drive
                                                 2.2kw(continuous)/3.7kw(10min/25%ED)
          
          Coolant tank capacity                 =170L
          Dimensions(WxDxH)                     =2,334x1,200x1,695mm
          Weight                                =2,600kg
          Power consumption                     =4.7KVA
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com