To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase.
          
          
          Equipped With:
            =LNS 3.26 Super Hydrobar
          
            =Part Catcher
            =LNS Turbo Chip Conveyor (rear discharge)
            =Chip Blaster J5Swiss High Pressure Coolant
             Long Parts Attachment
             Mist Collector
          
             Extension block for 2 extra ID Tool positions
          
          
          General Specifications per the manufacturer:
          
          CNC Control:                                Fanuc 180iS (Tsugami lK-1)
          Maximum Bar Diameter:                       1.023"
          Main Spindle:
             Spindle Speed:                           200 to 7,000 rpm
             Indexing:                                C-axis
             C-axis Increment:                        0.001 degrees
          Tooling Set-up:
             Number of Tool Stations:                 6-OD
             Rotary Tools:                            4-Cross Driven Tools 
             End Working Tool Positions:              4 (2 can be driven)
          
             Backworking                              8, 3 are driven
             Maximum Speed Cross Tool T10-T12:        200 - 5,000 rpm
             Maximum Speed Cross Tool T13:            120 - 3,000 rpm 
             Driven Tool Drive Motor Rating:          1.5 HP
             Turning Tool Size                        5/8" square
          Programmable Servo Axes: 
             "Z1" Main Headstock in and out:          8.21"
             "T1" O.D. Tool Slide up and down:        5.90"
             "T3" Backwork Slide in and out:          5.11"
             "X1" O.D. Tool Slide right and left:     2.00"
             "X2" I.D. Tool Slide up and down:        7.90"
             Auxiliary Slide Motion:
             "Z2" I.D. Tool Slide in and out:
             (synchronous to "Z1"):                   7.88"
          Sub-spindle Specifications:
             Maximum Diameter:                        1.023"
             Maximum Drill Capacity - mild steel:     3/8"
             Maximum Tap Capacity - mild steel:       5/16"
             Speed Range (serial interface):          2,000 to 7,000 rpm
             Power Rating:                            3.0 HP
             Sub-spindle Indexing:                    5 degree increment
          Horsepower of Main Spindle:                 5.0 HP
          
          Machine:  104" x 69" x 76" 6,200 lbs
          Barfeed:  101" x 40" x 45" 1,500 lbs
          Chip Conveyor:  66" x 36" x 70" 1,500 lbs
          Pallet Hydraulic Tank and High Pressure Coolant System  48" x 40" x 33" 750
          
          lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com