"To the best of our knowledge all details listed below are deemed correct.
          It is the buyer's responsibility to confirm prior to purchase."
          
          
          General Spcifications per Company Brochure:
          This unit can be used with Oil or Water Soluble Coolant
          
          Max. Pressure:                 Up to 2000 PSI (130 bar) with coolant
          Max. Flow Rate:                5 GPM (19 l/m)
          No. of Ports:                  2 Ports Std. up to 8 Optional
          Filtration:                    5 Micron Single Filter
          Main Motor HP:                 7.5 (10 kw)
          Voltage -3 Phase:              208/230v or 480v
          Amperage;                      208/230v 28 FLA - 480v 14 FLA
          Control Voltage:               24 Volts
          Feed Pump:                     Standard
          Dirty Filter Alarm:            Standard
          Foot Print (LxWxH):            46" x 23" x 35"
          Weight (lbs):                  850
          Heat Transfer Rate:            Typically removes up to 6 HP
              (15,000 BTU) with 50F *E.T.D.
          
          Has been used with oil coolant since new (max 1000 psi with oil)
          
          
          Almost New!
          
          Originally interfaced to a Ganesh lathe
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com