Click the link below to view a video demonstration of this machine
https://youtu.be/n9i353GyKS8
To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.
Equipped With:
Lexaire Mini Rhinobar Bar Feed
Part Conveyor
Part Catcher
Guide bushing unit and chucker kit for non-guide bushing operation
Currently set up as a guide-bushingless machine. Can be reconfigured to a
guide bushing configuration.
Very Little Use - machine is in excellent condition.
General Specifications As Per Brochure:
Installed new 2016
Machining Capacity
Max.Machining diameter mm 32
Max.Machining length mm 190 / 1 chuck
Parts pick-up length mm 93
Main Spindle
Main spindle through-hole dia. mm 37
Main/Back spindle RPM rpm Max.8000
Back spindle chucking diameter mm 32
Main Side
OD Tool With toolholder 16mmx6
ID Tool ER20( 13)x1+ER16( 10)x5
Drill tool ER20( 13)x5 ?Live & Cross
Main drill tool spindle speed rpm Max.6000
Sub Side
OD Tool 16x2
ID Tool ER16( 10)
Back drill tool Live3 + Cross3
Back drill tool spindle speed rpm Max.6000
Max. Number of Tool 33
NC Command
Feed Rate
Main Z1 m/min 28
Main X1 m/min 20
Main Y1 m/min 28
Main C1 /min 144000(400rpm)
Sub Z2 m/min 25
Sub X2 m/min 28
Sub Y2 m/min 28
Sub C2 /min 144000(400rpm)
Min. unit
X1/Y1/Z1/X2/Y2/Z2 mm 0.0001
Main Spindle C-axis
Back Spindle C-axis deg 0.0001
B-Axis Unit deg 0-135
Motor
Main Spindle kW 3.7/5.5
Main tool spindle drive kW 0.75/1.5
X1/Y1/Z1 kW 1.0
Back Spindle kW 1.5/3.7
Back tool spindle drive kW 0.75/1.5
X2/Y2/Z2 kW 1.0
NC unit MITSUBISHI M70VS
NC Display 10.4" Color TFT
Machining program memory capacity 1,280m[500KB]
Number of tool off-set correction 40
Dimentions
Main Spindle Height mm 1015
Coolant tank capacity l 100
W x D x H mm 2275 x 1185 x 1990
in 90 x 47 x 47
Weight kg 3,050
Lbs 6,725
Subscribe to RSS
