A Rotary Phase Converter, Voltage Stabilizer combination, when properly sized,
          
          provides the necessary voltage balance of close to + 5% or less between legs
          
          compared to standard 3-phase line voltage of + 10%. It also helps to keep the
          
          output voltage stable during peak loads, thus helping most CNC / PLC and other
          
          voltage sensitive equipment to operate properly
          
          Most CNC / PLC machines require a CNC PAC? 1 to 2 times larger than the
          
          spindle motor in order to accommodate the extra amps for starting, instant
          
          reversing, and for the servos, hydraulics, etc.
          ? Later model CNC / PLC machines are more technologically sophisticated, with
          
          up to 10,000 RPM and higher spindle speeds, regenerative braking, etc. These
          
          may require the CNC PAC? sized even larger. We have a large data bank from
          
          past applications experience to help you with these decisions.
          Note: 220V CNC PAC? is 220V single-phase in and 220V three-phase out. 460V CNC
          
          PAC? is 460V single-phase in and 460V three-phase out.
          
              220V CNC Pack 30:                       30HP
          
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): nick@automatics.com
Web: www.automatics.com