To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
          
          Option: This is virtually a new machines and is being sold as-is with a start-
          
          up warranty only covering that the machine will power up and function normally
          Delivery, Installation & Training can be quoted separately.
          
          
          
          Equipped With:
             Synchronous Rotary Guide-Bushing Holder 
             Non-Guide Bushing Holder (Chucker Kit)
             Parts catcher and finished parts conveyor w/ output ramp & collection bin
          
             Cutoff confirmation sweep-arm switch 
             Sub-spindle programmable air blast and finished parts ejector
          
             High-Performance "C"-Axis on both the main and sub spindle
          
             Rigid Synchronous Tapping
             Enclosure pre-drilled and tapped for 4-High Pressure Oil Ports
             Cutting oil chiller system - 18K BTU's (For Machine Thermal Stabalization) 
             Coolant flow confirmation monitoring switch w/ fault interrupt interface 
             8-live-tool ER-16 collet spindles (3-not mounted)
             3-Postion Z-axis (Live Face) Tool
             Collets, TF-25: 3/8", 7/16", 1/2" 
             Guide Bushings, TD25S: 3/8", 7/16"  
             (4) Foot pads
             Manuals: Ganesh Operations, Parts, Electrical
             Manuals: Mitsubishi M800/M80
             Tool Box
          
          
          General Specifications:
          
          MAIN SPINDLE:
          Maximum RPM / spindle bearing:            10,000 RPM (5-bearing spindle, 3-
          
          front, 2-rear ball bearings) 
          Main Spindle Servo Motor:                 5- HP 15 Min Duty Rated (3HP
          
          Constant) Collet Style for main & subspindle:                      Hardinge TF-
          
          25S / S&M TS-25 / Star SR-20 Collet Actuation System:              Pneumatic
          
          Piston Driven Toggle Clamp
                                                    Feed Finger Style Synchronous Rotary
          
          Guide-Bushing:                            TD25S (20mm round, 16mm Hex, 12mm
          
          Square) Maximum Barstock Diameter:        23mm (Collet Range - 1/16"-13/16")
          
          Maximum Distance between Spindles:        23.6" (600mm) Spindle Centerline
          
          Height:                                   42" (1060mm) 
          MAIN SPINDLE TOOLING:                     17-Tool Holders - (30 Standard
          
          Total) 
          O.D. Turning Tool Holders-S1:             (6) 12mm square shank turning tool
          
          holders
          I.D. Internal Tool Holders-S1:            (4) 22mm Shank Round Tool Sleeve
          
          Bores I.D. Deep Hole Drill Positions-S1   (2) 22mm Shank Round Tool Sleeve
          
          Bores Cross slide live tools-S1:          (5) ER-16, 8,000 RPM, 1.6 HP (1.2kw)
          
          Axial front slide live tool opt.S1:       (3) ER-16 - Optional in Lieu of 1
          
          Cross T.  Maximum Drilling/Tapping Capacity:                       10mm
          
          Drilling/M8 Tapping - Main Spindle Cross Drilling / Tapping Capacity:8mm
          
          Drilling/ M6 Tapping - Cross Tools 
          SUB SPINDLE:
          Sub spindle RPM / spindle bearing:        8,000 RPM/4 Bearing - Quad Duplex
          
          Sub Spindle Servo Motor (2.2/3.7kw)       5-HP, 15 Min Duty Rated (3HP
          
          Constant) Collet Style for main & subspindle:                      Hardinge TF-
          
          25S/ S&M TS-25/ Star Sr20 Collet Actuation System:                 Pneumatic
          
          Piston Driven Toggle Clamp Barstock Diameter:                      23mm
          
          (Collet Range - 1/16"-13/16"
          Finished Parts Ejector & Air Blast:       Included (Can Pass Long 20mm Thru
          
          Sub Spi.  workpiece length/front ejection:                         110mm part
          
          length for front ejection 
          SUB-SPINDLE BACK-WORKING TOOLING:         13-Tool Holders O.D. Turning Tool
          
          Holders-S2:                               (3) 10mm Square Shank Turning Tool
          
          Holders I.D. Internal Tool Holders-S2:    (4) 22mm Shank Round Tool Sleeve
          
          Bores I.D. Internal Tool Holders-S2:      (3) ER-16 Fixed Tools - 3/8" Max. 
          
          Subspindle axial live tools-S2:           (3) ER-16 Axial Live Tools 4,000
          
          RPM/ 1 HP 
             (2 radial live tools are available - one for each inboard axial driven tool
          
             on subspindle tool block)
          
          Backworking machining length:             6.1" Turning / 3.14" Boring
          
          Drilling/Tapping Capacity:                10mm Drilling / M8 Tapping Cross
          
          Drilling/Tapping Capacity:                8mm Drilling / M6 Tapping 
          AXIS:
          Main Spindle Stroke:                      9.840" Single Stroke (250mm) Turning
          
          Length-Rotary Bushing:                    7.48" (190mm) Turning Length-Without
          
          Bushing                                   2.36" (60mm) X1,Y1,Z1,X2,Y2,Z2 Rapi
          
          Traverse:                                 944 IPM (24m/minute) X1,Y1,Z1 Axis
          
          Motor Power:                              1-HP (.75kw) X2,Y2,Z2 Axis Motor
          
          Power:                                    .67-HP (.5kw) Minimum input
          
          unit:                                     0.0001" (0.001mm = 40 millionths) 
          MACHINE SPECIFICATIONS:
          Machine Dimensions (L x W x H):           118" x 55" x 78" (2846 x 1284 x 2024
          
          mm) Machine Weight:                       5,954 lbs (2700kgs) Coolant Pump
          
          Power:                                    1.5-HP (1.2kw) Coolant Tank
          
          Capacity:                                 58-Gal Coolant Tank (220L) (Oil
          
          Only) Lubrication distribution-2-liter    Way lube @ 3-6cc / 15 Minute Cycle
          
          Machine Power Requirements:               220vac, +5%, 53 Amps, 20kva, 3-
          
          Phase, 60hz Air Requirements:             85-PSI @ 6-CFM 
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com