To the best of our knowledge all details listed below are deemed correct. 
          It is the buyer's responsibility to confirmed prior to purchase.
          
          
          Equipped with
              8-Station Turret
              16C Collet Nose
              Part Catcher
              Tool Holders Included:
               (2) Single Drill Sleeve 
               (1) Double ID 
               (4) Boring Bar ID for turret
               Misc drill chucks
              Door Interlock
              Tool Box/wrenches
          
          
          General Specifications per manufacturer's brochure
          
          AXIS TRAVEL
          
          X-Travel                               8.46" (215mm)
          Z-Travel                               5.98" (152mm)
          Maximum Turning Diameter / Length      7.87" / 5.5" (200mm / 140mm)
          Swing over Bedways                     12.59" (320mm)
          
          AXIS FEEDS
          Rapid Traverse - X, Z                  787 ipm (20/20m / min)
          Rated Cutting Feedrate                 236 ipm (6/6m / min)
          Mechanical Way System - X/Z            Box Ways 
                                                 Turcite coated & pressure lubricated
          Slant Bed Angle                        20 deg Slant Bed Angle for tooling
          Axis Drive Motor Power - X-axis        1.0-HP (.75 kw)
          Axis Drive Motor Power - Z-axis        1-1/3-HP (1.0 kw)
          Ballscrew Diameter - X, Z              32mm
          Positioning Accuracy - X/Z             0.00015"  (0.004mm)
          Positioning Repeatability - X/Z        0.00008"  (0.002mm)
          Least Input Command Increment          0.0001" / 0.000040" 
                                                 0.001mm / (40-millionths in metric)
          SPINDLE
          Spindle Nose Mount                     A2-5
          Spindle Speed                          6,000
          Maximum Tapping Spindle Speed          2,000 rpm
          Maximum Bar Capacity                   1-1/4" (32mm)
          Spindle Bore                           34mm
          Spindle Bearing - inside diameter      70mm (80mm optional)
          Spindle Motor Power -                  3.7/5.5kw (7.5-HP 5.5kw) 
                                                 (10-HP 7.5kw spindle motor optional)
          Spindle Motor Torque                   26 ft. lbs. 35Nm
          Spindle Motor Drive Coupling           Belt Drive
          Spindle Runout                         0.000040" T.I.R.
          
          TOOLING PLATE & TOOL SYSTEM
          Tool Plate Overall Dimensions          8.66" x 36.45" (220mm x 706mm)
          Tool Plate T-Slot Dimensions           21mm base & 12mm neck width, 
                                                 (8mm base height /17mm total)
          T-Slots                                3 T-Slots on 63mm centers 
          Turning Tool Shank Size                20mm (3/4") square shank
          Internal Tool Shank Size 32mm 1-1/4"   (25mm for optional tool turret bores)
          Optional Driven Tool HP (.75kw)        1-Horsepower with 2:1 speed reduction
          
                                                 for increased torque
          Optional Drvn Tool Collet Size (1/2")  2-ER20 collets in a hydraulic
          
                                                 positioned upper/lower format
          
          SPECIFICATIONS
          Air Service Requirements               85 psi @ 5-scfm 5.5 Kg/cm2
          Electrical Requirements - 
              connected load                     10kva, 28-Amps 220vac  5%, 60-Hz
          Coolant Tank Capacity / Motor Power    21-gallons / 1/2-HP 
                                                 (80-liters / 2-amps)
          Lubrication Pump                       150 watts
          Hydraulic Pump Motor / Pressure        1-HP / 500 PSI (.75 kw / 32-bar)
          Floor space requirements (W x D x H)   81" x 64" x 64" 
                                                 282x135x183cm 
                                                 (+ chip conveyor)
          Machine Weight 4,850 pounds 2,200 kg
          
          Machine:  65" x 61" x 67" 4,850 lbs
          Chip/Coolant Pan:  44"x 26" x 20" 170 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com