To the best of our knowledge all details listed below are deemed correct. 
           It is the buyer's responsibility to confirmed prior to purchase.
           
           Equipped With:
              Royal Quick-GripT QG-80 Accu-LengthT Collet Chucks
              Parts Pick-Off Unit w/ programmable Parts Conveyor
              Barloader Interface
              Coolant pump for thru-the-turret coolant 
              2-Chip flushing coolant pumps - 2 headwall coolant nozzles main & sub
              Programmable air blast main spindle and subspindle
              3-Color Machine 
              Tower Light
              Chip Conveyor (42" Barrel height with "air-curtain" clean-off feature)
              approx 12-static BMT-65 toolholders 
              2-axial driven tools and 2-radial driven tools 
           
           EDGE Automatic Short Loader or full 12' bar loader available separately
           
           
           GANESH CYCLONE-78 MSY 6-AXIS CNC LATHE SPECIFICATIONS CAPACITY - 
           6-Axis Mill / Turn Center; 16-Station Live Tool Turret and 16-Driven positions
           True linear "Y"-Axis with 3.93" of travel and1.968" off of centerline ( 50mm)
           
           Maximum Turning diameter                Inch              O13.38" (340 mm) 
           Center distance                         Inch              42.12" (1070mm)
           
           between centers 
           Turning length                          Inch              29.13" (740mm) 
           MAIN SPINDLE -                          Integral Spindle 
           Spindle nose / (bearing diameter)       ASA Size          A2-6 (bearing
           
           diameter 4.72" / O120mm) 
           Spindle Bar Capacity                    Inch              O3.070" (78 mm
           
           drawtube I.D. / O88mm spindle bore) 
           Chuck Size Included                     Inch              O10" (with 78mm
           
           bore) 
           Spindle Center Height                   Inch              42" (1,050mm) 
           Maximum spindle speed                   RPM               60 -4,000 RPM
           
           (Integral Spindle) 
           Main Spindle motor power 18/22Kw        Horsepower        30-HP (30-minute
           
           duty rating) / 24-HP (constant duty rating) 
           SUB SPINDLE -                           Integral Spindle 
           Spindle nose                            ASA Size          A2-6 
           Spindle Bar Capacity                    Inch              O2.559" (65 mm
           
           drawtube I.D. / 86mm spindle bore) 
           Chuck Size Included                     Inch              O8" (with 65mm bore)
           
           (O10" optional) 
           Maximum spindle speed                   RPM               60 -4,000 RPM
           
           (Integral Spindle) 
           Main Spindle motor power 11/15Kw        Horsepower        20-HP (30-minute
           
           duty rating) / 15-HP (constant duty rating) 
           LIVE TOOL TURRET - 16-Station Servo Driven Live Tool Turrets 
           Number of turret stations               16                16 (Any combination
           
           of 16 ID, OD or Live tool stations) 
           Index time (adjacent tool / 180? index)                   Seconds 0.2 seconds
           
           / 1.2 seconds High-Speed Servo Indexing 
           Live Tool Power / RPM 3.7/5.5KW         HP                7.5-HP / 6,000 rpm,
           
           14.75 ft. lbs. torque (20Nm) 
           Tool Size / Collet Size                 Inch              1" (25mm) (for
           
           square tool & 32mm round tools) / ER-32 collets 
           Tool Holder Type & Size                 BMT-65 Base Mount Tooling 
           Turret Thru-The-Tool-Coolant            Rated to 1,000 PSI for High Pressure
           
           coolant option 
           "Y" AXIS - 
           Y axis travel                           Inch              3.93" of travel -
           
           1.968" off of centerline ( 50mm) 
           Y axis Rapid Feed Rate                  Inch              236 Inch Per Minute
           
           (6m per minute) 
           "C" AXIS - 
           Spindle Radial Resolution               0.001             360,000 radial
           
           positions with full contouring capability 
           "B" AXIS - (sub spindle travel) 
           B Axis Rapid Traverse Rate              Inch              1,573 Inch Per
           
           Minute (40m per minute) 
           B Axis Travel                           Inch              29.33" (745mm) 
           AXIS SPECIFICATIONS - 
           Axis Travel - X / Z Axis                Inch              X 8.97 / Z 27.55"
           
           (228mm) / (700mm) 
           Rapid Travers Rate - X / Y / Z Axis     ipm               630 / 236 / 1,573
           
           ipm (16 / 6 / 40 m/minute) 
           Minimum Programmable Input              Inch              0.0001" (0.001mm =
           
           40 millionths of an inch) 
           ANCILLARY SPECIFICATIONS- 
           Hydraulic System                        Gallons           8-gallons (30
           
           Liters) with 5-HP (3.5kw) pump motor 
           Coolant Pumps - Dual Coolant Pumps      HP                2x 1.7 hp pumps for
           
           tooling & 2 pumps for chip flushing 
           Coolant Tank                            Gallons           70-gallon (280
           
           Liters) coolant tank 
           MACHINE WEIGHT -                        Pounds            17,650lbs (8,000
           
           kgs) - Shipping Weight 18,680 lbs. (8472kgs) 
           ELECTRICAL REQUIREMENT -                KVA               50KVA (220vac  5%, 3-
           
           phase, 60 Hz, 130 amps) 
           AIR REQUIREMENT -                       PSI               85-psi @ 8-cfm for
           
           parts catcher, ejector, oil mist lubricator 
           MACHINE DIMENSIONS -                    Inch              Length 145"* / Depth
           
           80"/ Height 79" (*+48" for chip conveyor) 
           SHIPPING DEMENSIONS -                   Inch              Length 200" / Depth
           
           90"/ Height 93" 
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com