To the best of our knowledge all details listed below are deemed correct. 
          It is the buyer's responsibility to confirmed prior to purchase.
          
          
          Equipped with (must be verified by buyer):
            LNS Alpha ST320 S2 Magazine Bar Feed
                with 16, 20 and 25mm channels
            LNS Turbo Chip Conveyor
          
          On Hours:       Approx 6800 hours
          Cutting Time:   Approx 1500 hours
          
          
          
          
          Specification from OEM Brochure (All details should be confirmed by buyer):
          
          Control:                                Fanuc 0iTF
          Number of Controlled Axes:              7
                                                  X1, Y1, Z1, X2, Z2, C1
          Barstock Working Range:                 3 - 20mm
          Max Machining Length/stroke:            210 w/ rotary guide bushing 
                                                  45mm Non-Guide Bushing
          Max Main Spindle Drilling Diameter:     10mm
          Max Main Spindle Tapping Diameter:      M10
          Max Back Spindle Drilling Diamter:      8mm
          Max Back Spindle Tapping Diameter:      M8
          Max Cross Drilling Diameter:            6mm
          Max Cross Tapping Diameter:             M5 x 0.8
          Max Back Drilling Diameter:             6mm
          Max Back Tapping Diameter:              M5
          
          Main Spindle Speed:                     200 - 10,000 rpm
          Back Spindle Speed:                     200 - 12,000 rpm
          Main Spindle Indexing:                  Full C
          Back Spindle Indexing:                  1 degree
          
          Tool Storage Capacity                   21 Tools
                                                  4 Live
                                                  4 ID/ 4BW
                                                  5 OD
                                                  4 BW
          Tool Size:                              12mm x 12mm x 85mm
          
          Main Spindle Motor:                     2.2 / 3.7 kW
          Back Spindle Motor:                     1.5 / 2.2 kW
          X1, X2, Y1, Z1, Z2 Axes Motors:         0.5 kW
          Cross Drill Motor:                      0.18 kW
          Lubricating Oil Pump Motor:             3 W
          
          Power Source Requirement:               11KVA
          
          Machine Dimensions (approx):            65" x 43" x 67", 3800 lbs
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com