To the best of our knowledge all details listed below are deemed correct. 
          It is the buyer's responsibility to confirmed prior to purchase.
          
          
          All details must be confirmed by the buyer
          
          Equipped with (all detail must be confirmed by the buyer):
              Fanuc 32iTB Dual Path Control
              Rotary Guide Bushing, A/C Synchronous 
              Chucker Kit
          
              Parts Chute
              Parts Conveyor
              MP Systems 8-line High pressure Coolant System (HW8)
          
              TriMist 850 Mist Collection System
              LNS Turbo HM500 Chip Conveyor
              Machine Boss Tool Monitoring System
          
          New replacement cost approx $275K as equipped.
          
          
          General Machine Specifications per Manufacturer's Brochure
          
          Number of Axes:                            8 (X1,Y1,Z1,C1,X2,Y2,Z2,C2)
          
          Chucking Barstock Diameter:                8 - 32mm  (0.31 - 1.25")
          Max Machining Length:                      320 mm (12.59")
                                                       (w// direct Drive Rotary GB)
          Max Drilling Diameter:                     12 mm (.47")
          Max Tapping Diameter:                      M10
          Max Back Spindle Chucking Diameter;        32mm (1.25")
          Max Back Spindle Drilling Diameter:        10mm (.39")
          Max Back Spindle Tapping Diameter:         M8
          Max Tool Spindle Drilling Diameter:        8mm (.31")
          Max Tool Spindle Tapping Diameter:         M6
          Max Tool Spindle Slotting Diameter:        45mm (1.77")
          Main Spindle Speed:                        200 - 8000 rpm
          Back Spindle Speed:                        200 - 8000 rpm
          Rapid Traverse Rate:                      =32 m/min (X1,Y1,Y2 24 m/min)
          
          Tool Storage Capacity (std/max):           31/43
          Stick Tool Size:                           16 x 16 x 100mm
          Tooling Configuration:
              Live Cross Drills:                     7
              OD Turning Tools:                      7
              ID Tools (by sub spindle:              2
              ID/BW Tools:                           5
              BW Tools:                              4 Live + 4 Fixed
          
          Main Spindle:                              3.7 / 5.5 kW
          Back Spindle:                              2.2 / 3.7 kW
          Tool Spindle:                              1.0 kW
          Rotary Guide Bushing:                      1.5 / 3.0 kW
          X1, Y2:                                    0.5 kW
          Y1, Z1, X2, Z2:                            0.75 kW
          Coolant Pump:                              400 W
          Lubricating Pump:                          3 W
          
          Power Requirements:                        21.4 KVA
          Air Requirements:                          0.4 MPa or Above
          Air Discharge rate:                        40 NL/min
          Coolant Tank Capacity:                     180 L (47.5 gal)
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com