To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm details prior to purchase.
          
          Drilling capacity in St 60 with inserted drill: O 12 mm
          Thread cutting:                             M 8
          Milling capacity in St 60:                  30 cm3 /min
          Tool places:                                24
          Tool taper DIN 69893:                       HSK-A 40
          Max. tool diameter:                         47 mm
          Max. tool diameter if adjacent places are free:100 mm
          Max. tool length:                           160 mm
          Max. tool weight:                           1.2 kg
          Tool change time approx.:                   0.8 s
          Chip-chip time swivel head position 0:      2.1 s
          Chip-chip time swivel head position 90:     2.5 s
          Infinitely variable speed range:            15,000 rpm
          Spindle drive:                              14 kW
          Max. torque:                                15 Nm
          Milling Spindle ramp time up 15,000 rpm:    approx. 0.6 s
          Turning Max. speed thread cutting:          8,000 rpm
          Spindle bearing diameter- front:            40 mm
          Tool clamping:                              6,500 N
          Clearance spindle take-up - table surface:  170 - 480 mm
          Travel X/Y/Z axis:                          17.71"/ 10.62" / 12.20"
          Feed force X/Y/Z axis:                      449.62 lb /449.62 lb / 674.43 lb
          Rapid feed rate X/Y/Z axis:                 2952.76 IPM
          Acceleration X/Y/Z axis:                    10 / 15 / 20 m/s2
          Swiveling range of the spindle:              -20 / +115
          Rapid feed rate B axis:                     60 rpm
          Acceleration time B axis:                   0.1 s
          Clamping surface:                           30.31" x 11.41"
          Mounting hole pattern:                      M16 O15H7 x 50 mm
          Table load capacity:                        1103 LB
          Cooling unit, tank capacity:                100 l
          Total connected power approx.:              17 kVA
          Machine weight approx.:                     7500 LBS
          Floor space approx.:                        25 sf
          Air connection:                             6 bar
          
          Equipped with:
            92 Gallon Secondary coolant tank
            High Pressure Coolant pump
            MSC Coolant Chiller 
            Tool Touch Setter
            Spindle Probe
            Spindle Chiller
            Chip Conveyor
            Parts Conveyor
            Fire Suppression
            Mist Collection
            MSC Coolant Chiller 
            2 Spindle Grippers
            30+ Turing and Milling Holders
            Collets and new Jaws
          
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): nick@automatics.com
Web: www.automatics.com