To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
          
          LIVE CROSS, FACE & BACK WORKING 
          
          Equipped With:
             Control Fanuc 18-iTB (7-axis)
             Iemca Boss 551E Magazine Barfeed w/signal light s/n A05082301
              w/ 43 & 28mm Guide Channels & pusher sets
             Parts Catcher
             Parts Conveyor
             Sub Spindle Ejector
             All Live Spindles Have Rigid Tap
             9 Live Tool Capable (Installed Live Tools; 4 Cross/2 Face/2 BW)
             Misc Collets & Guide Bushings (see below) list to include the follow 
              (List may not be exact):
          used collets TF48/B42:
          7/16" HX (2) 1/2"  (3) 35/64"
          .866"  .884"  .884"EN  1"  1"EN
          1.038" 1-3/16"  1-1/4"  1-1/2"  1-1/2"EN   
          
          used guide bushing TD38:
          5/16"  5/16"XP  (2) 3/8"  7/16"HX  (2) 1/2"  5/8"  11/16"  3/4" 
          1"  1-1/16"  1-1/8"  (2) 1-1/4"  1-1/2"(St)
            
          **** 
          Options, ask for quotes for the following:
             High pressure coolant system by ChipBlaster
             LNS Turbo Chip Conveyor, standard or MicroFilter type
             Tooling for your part set-up
          
          ===========================================
          
          Main Spindle
          Max Bar Diameter                                 38mm (1.5")
          Max Machining Bar Length (1) Chucking            8.26"
          Main  Drill/Tap                                  12mm/M10
          Cross Drill/Tap                                  10mm/m8
          Main Spindle Positioning C Axis                  .001"
          Main Spindle Speed                               8,000 RPM
          No. Main Spindle Turning Tools (Fixed)           5 Standard
          Tool Shank Size                                  12mm
          Main Spindle Cross Live Tools (Live)             4 Standard
          No. Y Axis Tool Block (Fixed)                    5 Standard
          Headstock Collett                                TF 48
          Guide Bushing Capacity                           1 1/2" (TD38S)
          
          Sub Spindle
          Sub Spindle Chucking Diameter                    38mm
          Sub Spindle Speed                                8,000 RPM
          Sub Spindle Positioning C Axis                   .001"
          Back-end Face Drill/Tap                          10mm/m8
          Spindle RPM Mill/Drill Main & Sub                8,000 RPM
          Back Working Live Spindle Mill/Drill             4,000 RPM
          No. Face Tools (Sub Spindle) (Fixed)             1 Standard
          No. Face Tools (Sub Spindle) (Live)              2 Standard
          No. Face Tools (Back End) (Live)                 3 Standard
          No. Face Tools (Back End) (Fixed)                1 Standard
          Sub Spindle Collet                               TF 44
          
          Total No. of Fixed Tools                         12 Standard
          Total No. of Live Tools                          9 Standard
          Total No. of Tools                               21 Standard
          
          Mechanical Driven Rotary Guide Bushing           Standard
          Main Spindle Horsepower                          7.5 HP
          Sub Spindle Horsepower                           3.5 HP
          Cross Drill/Mill Unit                            1.5 HP
          Back End Face Tools                              1.3HP
          Machine Electronics                              220/3/60
          
          Machine:  97" x 62" x 77" 9,500 lbs
          Chip/Coolant Pan:  52" x 48" x 15" 500 lbs
          Barfeed:  192" x 26" x 53" 2,000 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): kristen@automatics.com
Web: www.automatics.com