Specifications are from OEM Brochure and Equipped With items are described to
          
          the best of our knowledge.  ALL items show be confirmed by the buyer.
          
          Equipped With:
          
              OSP-P300L control
              725 cutting hours
              Machining NAVI (microphone system to adjust VSS and reduce chatter)
              Okuma steady rest interface (electronics and software)
              Schunk steady rest mounted on lower turret
              8 spare M-codes 
              MP Systems RF8 high pressure coolant 1000 psi
              Royal QC65 Quick Change Collet Chuck
              M-Code operated Chip conveyor
          
          List price was $318,931.00 (with steady rest and HP coolant)
          
          General Specifications
          
          PART CAPACITY
          Swing over bed                         19.69 in.
          Max. turn diameter                     6.3 in.
          Standard turning diameter              2.36 in
          X-axis travel 
              Upper                              3.94 in.
              Lower                              3.94 in.
          Z-axis travel 550C 
              Upper                              22.44 in.
              Lower                              22.44 in.
          Maximum turning length 550C            21.6 in.
          
          STANDARD SPINDLE 
          Spindle nose                           JIS A2-6
          Spindle speed range                    40~4,000 rpm
          Number of Ranges                       Single range
          Spindle bore diameter                  2.44 in.
          Spindle bearing inner diameter.        3.93 in.
          
          STANDARD SPINDLE - MOTOR - OSP
          Main Spindle Motor Type                Base mounted VAC
          Number of ranges                       Single ranges       Stepless
          Main Spindle Motor Power -30 min/cont=15 / 10hp            11/7.5 kW
          Main Spindle Max Motor Torque -30/cont 103/88 lbf-ft       140/95 N-m
          
          STANDARD SPINDLE - MOTOR - FANUC
          Main Spindle Motor Type                Base mounted VAC
          Number of ranges                       Single ranges       Stepless
          Main Spindle Motor Power - 
              30 min/60min &cont                 15 / 10hp           11/7.5 kW
          Main Spindle Max Motor Torque
              30 min/60min/cont                  103/70/52 lbf-ft    140/95/71N-m
          
          TURRETS
          Turret type - Inch Based - USA Std 
              Upper                              6 station slotted - inch spec
              Lower                              6 station bot on - inch spec
          Turret indexing time                   0.15 sec. / Non-lift design
          Turret Coupling System                 Crown Gear Engagement
          Turret Clamping                        Hydraulic Clamping
          Turret coolant                         Onion nozzles for standard and 
                                                   inverted tools
          Turret OD tool clamping                Wedge clamp
          
          FIXED TOOLING
          Tool shank OD                          1" square
          
          SERVO DRIVES - OSP                     INCH                METRIC
          Rapid feedrate X (A & B) axis          787 inch/min.       20 m/min.
          Rapid feedrate Z (A & B) axis          1181 inch/min.      30 m/min.
          X-axis servo power - Okuma BL 
              Upper                              4 hp                3.0 kW
              Lower                              2.9 hp              2.2 kW
          Z-axis servo power - Okuma BL 
              Upper                              4.6 hp              3.5 kW
              Lower                              4.6 hp              3.5 Kw
          
          SERVO DRIVES - FANUC                   INCH                METRIC
          Rapid feedrate X (A & B) axis          787 inch/min.       20 m/min.
          Rapid feedrate Z (A & B) axis          1181 inch/min.      30 m/min.
          X-axis servo power - Okuma BL 
              Upper                              2.4 hp              1.8 kW
              Lower                              1.6 hp              1.2 kW
          Z-axis servo power - Okuma BL 
              Upper                              3.3 hp              2.5 kW
              Lower                              3.3 hp              2.5 Kw
          
          BALL SCREWS                            INCH                METRIC
          Diameter x Pitch
          Ball screw diameter X-axis 
              Upper                              1.259 in x 0.47 in  32 mm x 12 mm
              Lower                              1.259 in x 0.63 in  32 mm x 16 mm
          Thrust Bearing location X-axis               X minus (pre-tensioned)
          Ball screw diameter Z-axis 550C 
              Upper                              1.25 in x 0.63 in   32 mm x 16 mm
              Lower                              1.25 in x 0.63 in   32 mm x 16 mm
          
          TAILSTOCK (550 MODEL)                  INCH                METRIC
          Body positioning                       By separate ballscrew (W axis)
          Body movement                          Linear guides
          Standard quill type                    Dead quill ( Employs revolving center)
          Quill diameter                         3.54 in.            90 mm
          Quill ID                               MT No. 5 Dead
          Quill stroke                           4.724 in.           120 mm
          Quill Initiation                       Foot pedal / NC Command
          Center tooling                         MT 5 Revolving Center
          
          EQUIPMENT FLOOR SPACE 550C             INCH                METRIC
          Machine Height 550                     80"                 2,045 mm
          Req. floor space required W x D 550
          (excluding chip conveyor)              88 in x 78 in       2240 mm x 1,980 mm
          Machine weight 600 BCD                 9,240 lbs.          4,200 kg
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com