Specifications are from OEM brochures, buyers should confirm all details below
Click the link below to view a video demonstration of this machine
https://youtu.be/BbnUvJ8WXfQ
OEM Destription **
OEM Control Description *
All specification from OEM brochure, buyer should confirm all details
Equipped With:
LNS Eco Load LS2 Short Bar Loader
Misc ID & OD tooling
Chip Conveyor
Mist Collector
Work Tower Light
Finished Parts Catcher
Finished Parts Conveyor
OEM General Specifications and Descreiptions
:
Control*: Ganesh Super 900T Advanced Multi-Tasking
MAIN & SUBSPINDLE
Spindle Motor 10HP (7.5 kW)
Maximum Speed 6,000 rpm
Collet Nose Brown & Sharpe #22 or Traub A-32
Drawtube ID 1.456" (37mm)
Traub TRB-A32 Collet Capacity 1.25" (32mm)
Spindle Center Height to Table 3.464" (88mm)
Spindle Center Height to Floor 42.2" (1070mm)
MACHINE AXIS
X-Axis Travel: Twin cross-slides 13" (330mm)
Z-Axis Travel: Twin opposed spindles 10.63" (270mm)
Weight: 7300 lbs
Dims: 108"L x 58"D, x 98"H
(add 30" for chip conveyor)
(reduce ht by 24" if no mist collector)
Main Features:
Simultaneously Machine on the Main and Sub Spindle
"C"-Axis on both spindles for Live Tool Applications
Dual Parallel Gang-Tooled Slides for Fast Production
Rigid Tapping on both spindles
Integral Lathe Motor Spindles
Parts Catcher with Parts Conveyor
Chip Conveyor
High Pressure Coolant Option Included
Mist Buster / Collector Option Included
** Ganesh (OEM) machine Description:
The GANESH CYCLONE-32 GTS is a 6-axis 1.25" (32mm) bar diameter twin spindle
CNC production turning center with a fully synchronized C-axis on both the
main and subspindle. The configuration produces shorter cycle-times because
the Counter Spindle works simultaneously with the Main Spindle. This lathe
features dual parallel gang tooled slides sitting side-by-side that allow
flexibility in tool placement, including the use of driven tools. Both the
main gang slide and the subspindle gang slide work completely independently,
allowing for shorter cycle times because the front and the back of a workpiece
can be machined at the same time.
* Ganesh Super 900T Advanced Multi-Tasking
PC-based control with 256 MB memory, 96-tool offset pairs, and a 15" LCD
color monitor
Program check-out feature using MPG handwheel to advance and retract axis
moves at the speed that the handwheel is turned to maintain a high level
of process control
Toolpath shown in a multiple color overlay displaying each tool
Tool-Life Management
Over 20-standard canned cycles for efficient program development
Advanced drilling and tapping servo synchronization for shorter cycle times
Cylindrical Interpolation transforms the cutting path from a plane to a
cylinder for engraving etc.
Polar coordinate interpolation to synchronize linear axis motion to rotary
workpiece motion
Ladder diagram for extensive machine condition evaluation and diagnosis
Parameter setting pages by group layout with complete description in clear
text
NC file name storage with complete record of start time, total time and
output quantity.
Machine: 107" x 62.5" x 87"
Chip Conveyor: 102" x 23" x 53.5" 440 lbs
Coolant/Chip Pan: 73.5" x 46" x 20.5" 278 lbs
Barfeed: 66" x 47" x 49.5" 600 lbs
MP Systems Cooler/Filter: 44" x 24" x 36.5" 520 lbs
Subscribe to RSS
