All Information From OEM Brochure Should Be Verified By Buyer:
          
          Equipped With:
               Fanuc CNC Control 18 IT
               HOWA Hydraulic 3-jaw Chuck - 15" (24" chuck available)
               Standard tooling Package, 3 stick, 3 boring bar
               The Live milling feature was never used!
               Two new Live heads, 1) Axial, 1) Radial
               High And Low Chucking Pressure (OPTION)
               Chip Conveyor Rear Discharge
               Interfaced for robot
               Original door will be placed back onto machine prior to shipping
               Live milling with C axis
               Coolant tank and pumps
               Coolant thru the turret
               480V / 38 KVA
               All available Manuals
               This machine was rebuilt on 5/17/2012
          
          
          Specifications:
          
          Max Swing                              27.6"
          Maximum Cutting Diameter               24.00"
          Maximum Cutting Length                 26.00"
          X Axis Travel                          14.6"
          Z Axis Travel                          26.00"
          Rapid Traverse Rate                    944 IPM X and Z
          Spindle Center Height From Floor       42.7"
          Spindle Nose                           A2-11
          Spindle Speeds, Infinitely Variable    20 - 2,000 RPM
          Spindle Drive Motor                    40/30 HP
          Turret Type                            V 12
          Number of Driven Tools                 6 stations
          Driven tools RPM                       1-2000 RPM
          Collet for Driven tools                ER 323
          Max Tool size                          1.250" (tap M20)
          Driven tools HP                        5 HP
          C axis                                 .001 Deg.
          Floor space required                   W 80.94" X L 101.96"
          Machine Height                         H 144.09"
          Machine Weight (Approximate)           20,900 Lbs.
          
          
          THIS  IS WHAT WAS REBUILT ON MACHINE.
          
          Disassemble Machine as necessary for Repair
          Cleaned and inspected all parts for wear or damage and advise
          Rebuilt spindle complete
          Repair and replaced ball screws as needed
          Replaced all thrust bearings for ball screws
          Grind column ways flat Parallel and square
          Machined back of saddle
          Scraped saddle to match column ways
          Grind ways on top of saddle flat, Parallel and Square
          Machined vertical slide 
          Scraped vertical slide to Match top of saddle 
          Machined and scraped all gibs and hold downs
          Cleaned out way lube system and replaced metering units as needed
          Replaced all way wipers
          Assembled machine complete. 
          
          Inspection report available.
          
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): blandon@automatics.com
Web: www.automatics.com