General specification and tooling should be verified by buyer
          
          EQUIPPED WITH:
             FANUC 18iTB CNC CONTROL
             BIG BORE
             LIVE TOOLING
             HIGH PRESSURE COOLANT (800 PSI)
             KITAGAWA 12" CHUCK (L. SIDE) & 10" CHUCK (R. SIDE)
             UPPER AND LOWER TURRETS
             Y-AXIS ON UPPER TURRET
             DODECAGON TURRET HEADS
             MAIN SPINDLE AND SUB-SPINDLE
             C-AXIS ON BOTH SPINDLES
             SIMULTANEOUSLY CONTROLLED AXES (X, Z, C)
             CHIP CONVEYOR
             RIGID TAPPING
          
          TOOLING INCLUDED:
             14 LIVE STRAIGHT TOOL HOLDERS
             3  LIVE 90 DEGREE HEADS
             2  SANDVIK BORING BAR
             12 ID BORING BAR HOLDERS
             12 OD HOLDERS
          
          ** UNDER POWER AND READY FOR INSPECTION & PURCHASE
          
          SPECIFICATIONS:
          BAR CAPACITY (L SPINDLE)................. 3.93"
          BAR CAPACITY (R SPINDLE)................. 2.55"
          MAX TURNING DIAMETER (UPPER TURRET)...... 7.8"
          MAX TURNING DIAMETER (LOWER TURRET)...... 10.6"
          MAX TURNING LENGTH....................... 30.7"
          MAX DISTANCE BETWEEN SPINDLE NOSES....... 43.3"
          MIN DISTANCE BETWEEN SPINDLE NOSES....... 9.8"
          
          TRAVELS:
          X-AXIS TRAVEL UPPER TURRET........ 6"
          X-AXIS TRAVEL LOWER TURRET........ 7.7"
          Z-AXIS TRAVEL UPPER TURRET........ 30.7
          Z-AXIS TRAVEL LOWER TURRET........ 30.7
          Y-AXIS TRAVEL UPPER TURRET........ 1.5"
          AXIS TRAVEL (B-AXIS) SUB SPINDLE SLIDE... 33.4"
          
          SPINDLES:
          L SPINDLE HOLE........................... 4.7"
          R SPINDLE HOLE........................... 3.2"
          L SPINDLE NOSE........................... A2-8
          R SPINDLE NOSE........................... A2-6
          L SPINDLE SPEED RANGE.................... 2500 RPM
          R SPINDLE SPEED RANGE.................... 4500 RPM
          L SPINDLE MOTOR.......................... 25 HP
          R SPINDLE MOTOR.......................... 25 HP
          C-AXIS ON L & R SPINDLES................. .001 DEGREE
          
          UPPER TURRET CAPACITY 24 STATIONS........ 12 LIVE CAPABLE
          LOWER TURRET CAPACITY 24 STATIONS........ 12 LIVE CAPABLE
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com