Click the link below to view a video demonstration of this machine
https://youtu.be/OmQWbW2-s2s
GENERAL SPECIFICATIONS FOR THE TSUGAMI BS32-C MARK III
Control: Fanuc 18iTB
Standard Axes: X1, Y1, Z1, C1, X2, Y2, Z2
Maximum Bar Diameter: 1 1/4"
Z1-Axis Travel (synchronous to "Z2"): 9.75"
Main Spindle:
Spindle Speed: 200 to 7,000 rpm
Indexing: Full C-Axis (.001 degree)
Programmable Servo Axis Designations:
"Z1" Main Headstock In and Out: 9.75"
"T1" O.D. Tool Slide Up and Down: 11.6"
"x1" O.D. Tool Slide Right and Left: 2.28"
"X2" I.D. Tool Slide Up and Down: 8.66"
Auxiliary Slide Motion:
"Z2" I.D. Tool Slide In and Out:
(synchronous to "Z1"): 7.88"
Sub-Spindle Specifications:
Maximum Diameter: 1 1/4"
Maximum Drill Capacity - mild steel: .472"
Maximum Tap Capacity - mild steel: .393"
Speed Range (serial interface): 200 to 6,000 rpm
Power Rating: 2.7 hp
Sub-Spindle Indexing: 5 degree (C-Axis Opt)
Part Ejection: front or rear ejection
Horsepower of Main Spindle: 7.5 hp
Driven Tool Drive Motor Rating: 1.5 hp
Maximum Speed Cross Tool T10-T12: 200-5,000 rpm
Maximum Speed Cross Tool T13: 120-3,000 rpm
Number of Tool Stations: 6 OD, 5 ID, 3 ID/OD fixed BW tools
4 Cross Driven Tools, 2 Driven B/W
Tooling Sizes, Turning: 5/8" square
Dimensions (approx): 88" x 60" x 7'h
Weight (approx): 6000 lbs.
Equipped With (must be confirmed by buyer):
LNS Express 332 Magazine Type Bar Loader
Mayfran Chip Conveyor
Part Conveyor
Mist Buster
This machine will require some work. Ran square stock for main spindle is
noisy. Also, top live cross tool needs to be replaced - (threaded portion
sheared off) and bottom live cross tool needs rebuliding or replacement.
Machine: 104" x 56" x 97" 6,000 lbs
Coolant pan w/misc: 52" x 45" x 30" 391 lbs
Chip Convyeor: 73" x 35" x 65" 1,500 lbs
Barfeed: 194" x 27" x 48" 2,500 lbs
Coolant pump: 43" x 20" x 31" 200 lbs
Subscribe to RSS
