Equipped with (must be verified by buyer):
          
          Tool Head 
          
          General Specifications As Per Brochure:
          
          Max Stock Diameter: 5/32" (4mm) 
              Feed Range 
              ...Standard Lever ratio 2:1: 0.950 (24mm) 
              ...Special Lever ratio 3:1: 9/16" (15mm) 
              ...Long feeding device ratio 1:1: 1.850" (48m 
              ...Long feeding device ratio 1:1.2: 2.25" (57.5mm) 
              ...Long feeding device ratio 1:1.2: 2.25" (57.5mm) 
              ...Double feed without drilling: 4.25" (110mm) 
          
          
           Production Range with Turret Indexing: 1.25 - 31.5 p/Min 
              ................without Turret Indexing: 1.25 - 63 p/Min 
              Number of production cycles: 35 
              Max drilling depth: 9/16" (15mm) 
              Max axial Movement of counter collet spindle: 1" (26mm) 
              Max clamping diameter of drilling spindle: 1/8" (3mm) 
              Max clamping diameter of counter collet: 5/32" 94mm) 
              Drilling spindle speeds: 3000,5000,8000,12000 RPM 
              Turret Indexing time: 1/3 Sec 
              Number of cutting tools: 2 
              Drum turret: Yes 
          
          Rotating tool head 
              ...Max radial movement of both cutting tools together.. 
              .....with Standard Toolhead Ratio 3:1: .160" (4.1mm) 
              ....." Special "     " 6:1: .080" (2.05mm) 
              ....." Special "     " 2:1: .240" (6.15mm) 
              ...Toolhead speeds: 600 or 4000 RPM 
              Coil Dereeler: Inside/ Outside Dia: 6.7-12.5"/17.7" 
               Main Motor: 0.75 HP 
              Straightener motor: 0.50 HP 
              Dimensions: 27" x 70" 
              Weight: 2500 Lbs 
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com