Featuring:
            3.15" Bar Capacity and 10" 3-jaw chuck
            18.9" Swing Diameter
            43.3" Turning Length
            49.2" Center Distance
            D1-8 Spindle Nose
            15 - 2,500 RPM Spindle Speeds
            3-Gear Ranges for High-Torque
            Fully Enclosed Splashguard
            FAGOR 8055-TC CNC Control
          
          GTK-2050 TECHNICAL SPECIFICATIONS
          
          Capacities
          Swing over Cross Slide:                  10-1/8" (257mm)
          Swing thru Gap:                          27-9/16" (700mm)
          Gap Distance in Front of Faceplate:      8-13/16" (224mm)
          Between Centers Distance:                49.2" (1250mm)
          Bed Width of Ways:                       14-1/2" (370mm)
          Bed Depth:                               13-3/8" (340mm)
          
          Spindle
          Spindle Motor Horsepower:                (7.5Kw) 15-HP Peak 
                                                     (10-HP 30-minute duty rating)
          Spindle Speeds:                          15 - 2500 RPM infinitely variable
                                                     in 3-gear ranges
          Spindle Speed Gear Ranges, Automatically Selected:
             1= (15 - 300), 2= (301 -850), 3= (851 - 2500) RPM
          Constant Power Range:                    5.5kw 125 - 2500 rpm (5.5kw)
          Spindle Bore:                            3-1/8" (80mm)
          Spindle Nose - Camlock:                  D1-8 Camlock
          Spindle ID Taper in Spindle Nose:        MT-7 Morse Taper # 7
          Spindle Taper Reduction Sleeve Provided MT-7 to MT-5 Taper Reduction Sleeve
          
          Cross Slide - X-AXIS
          Rapid Traverse Feedrate:                 200 IPM (5m/min)
          Cross Slide Travel:                      8.07" (205mm)
          Cross Slide Width:                       9" (230mm)
          Cross Slide Ballscrew Diameter:          1" (25mm)
          Cross Slide Ballscrew Pitch 5mm Accuracy Grade C3 (H-P Laser Tested)
          Cross Slide Thrust:                      2860 ft. lbs. (1300Kg Force)
          
          Carriage - Z-AXIS
          Rapid Traverse Feedrate:                 300 IPM (7.5m/min)
          Z-axis Travel:                           50.4" (1280mm)
          Cutting Tool Height Maximum:             1.5" (38mm)
          Carriage Ballscrew Diameter:             1-5/16" (36mm)
          Carriage Ballscrew Pitch:                10mm Accuracy Grade C3 (H-P Laser 
                                                     Tested)
          Carriage Slide Thrust:                   6,200 ft. lbs. (2850Kg Force)
          
          Tailstock- Engraved With Inch / Metric Quill Graduations
          Quill Diameter:                          2-15/16" (75mm)
          Quill Stroke:                            7-7/8" (196.5mm)
          Quill Taper:                             MT-5 Morse Taper # 5
          Quill Tang Drive and Drift-slot For Tailstock Included
          Tailstock body Set-over Adjustment  :    3/8" (  10mm)
          Tailstock Body Is "Air Assisted" For Ease In Positioning
          Coolant Tank Capacity:                   40-gallons (115 liters)
          
          Specifications
          Coolant Pump Motor:                      350 watt Walrus coolant pump
          Coolant Tank Capacity:                   30-gallons (115 liters)
          Electrical Requirements:                 220vac  5%
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com