Featuring:
            17" Swing Diameter
            21" Turning Length
            3" Bar Capacity
            12 Station VDI-40 "Quick-Change" Tool Turret w/7HP Milling
            Y-Axis w/4" of Travel +/- 2" Off of Centerline
            C-Axis w/Full Contouring Capability
            Programmable Tailstokc w/MT #5 Programmable Quill
            10" Hydraulic 3-Jaw Lathe Chuck w/Set of Soft Jaws
            Chip Conveyor and Chip Cart Included w/Machine
            Parts Catcher
            Renishaw Tool Probe
          
          General Specifications As Per Brochure (must be verified by buyer):
          
          GANESH KSL-7612 TMY CNC LATHE SPECIFICATIONS:
          
          CAPACITY
          Swing over bedways:                     17.7" (450 mm)
          Maximum turning diameter:               12.6" (320 mm)
          Maximum turning length:                 21.6" (550 mm)
          Between centers distance:               30.5" (775 mm)
          
          SPINDLE
          Spindle nose/Spindle bearing NSK NN3026 A2-8 / 4-ball bearing spindle
                                                    w/double roller bearing
          Bar capacity / Spindle bore:            3.07"O (78 mm) / 3.58"(91mm)
          Spindle bore diameter/bearing diameter: 3.58" O (91 mm) / 130mm internal
                                                   bearing diameter
          Maximum spindle speed:                  3300 RPM (3,000 RPM when using 12" ck)
          Spindle motor horsepower:               30-HP Peak
          Spindle center height:                  48.5" (1230mm)
          
          TOOL TURRET Rated for 700-PSI coolant pressure
          Number of turret stations:              12 Any combination of 12 ID, OD
                                                    or Live tool stations
          Tooling type/(toothed-rack cross bolt on top)
                                                  VDI-40 DIN 5480 (axial Type-A face
                                                    mounting tool turret)
          Driven tool holder specification:       DIN 5480 - Spline drive driven tool 
                                                    coupling (Sauter type)
          Driven tool motor power / speed:        7-HP with 14.75 ft. lbs. of torque
                                                    (20 nm) / 4,000 RPM
          Turret index time (adjacent tool):      0.8 seconds
          Turret disk diameter:                   17.32" (440 mm)
          
          AXIS SPECIFICATIONS
          X - Axis Travel / Ballscrew diameter:   10.27" (270 mm) / 40mm x 8mm pitch
                                                    ballscrew
          Z - Axis Travel / Ballscrew diameter:   23.62" (600 mm) / 45mm x 8mm pitch
                                                   ballscrew
          Y - Axis Travel / Ballscrew diameter:   4" Y-axis travel = +/-1.97" (+/-50mm)
                                                    / 36mm x 8mm ballscrew
          Rapid Travers Rate - X-axis:            787 ipm (20 m/minute)
          Rapid Travers Rate - Z-axis:            787 ipm (20 m/minute)
          Axis Servo Motor Power - X,Y,Z axis:    4.7 HP (3.5kw) Mits servo motors
          Maximum Cutting Feedrate:               394 ipm (10 m/minute)
          Minimum Programmable Input:             0.000039" (0.001mm)
          
          TAILSTOCK (Programmable) Tag-Along Style. M-code pin-coupled to turret for
            positioning
          Quill Stroke / Quill Thrust:            4.92" (125 mm) / 2975 lbs. ( 1350kg)
          Quill Diameter:                         3.74" O (95 mm)
          Quill Taper:                            Morse Taper MT-5
          
          MACHINE SPECIFICATIONS
          Connected Electrical Load:              48KVA - 125amps @ 220 VAC  5%
                                                    service
          Pneumatic Requirements:                 Air service is not required for
                                                    this machine
          Coolant Tank Capacity:                  32-gallon tank w/ dual coolant
                                                    filtration
          Coolant Pump - Flood Coolant:           HP High Flow - Headwall flood
                                                   coolant
          Coolant Pump - Tool Turret:             1-HP / 50 PSI - tool turret coolant
                                                   (Walrus TPHK2T3-3)
          Coolant Pump - High Pressure Option:    3-HP / 150 PSI - tool turret coolant
                                                   (Walrus TPR2-9A)
          Automatic Metered Lubrication system:   3-6cc /15-minute (adjustable
                                                   lubrication flow rate)
          Operator Door Access Width:             31" door opening width for E-Z
                                                   operator access
          Machine Weight (approx.):               15,470 pounds (7000 kgs)
          Machine Footprint ( W x D x H ):        125" x 82" x 81" (add 34" for chip
                                                    conveyor
          Warranty - Standard (extended warranty available) 3-year control warranty
          1-year machine warranty
          
          GANESH KSL-7612 TMY Productivity Package $149,990.00
          
          Productivity Package Includes:
            10-Piece Start-Up VDI Tooling set
            Chip Conveyor and Chip Cart
            Tailstock
            Live Center
            Parts Catcher
            Renishaw HPGA-LP2 Push-Button Tool Probe
            Barloader Interface
            10" 3-Jaw Chuck w/ 3" Through-Hole (TF3X-10)
          
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com