General Specifications As Per Brochure
           
           Max. Pressure:                           80 Bar
                                                    1200 PSI
           Coolant Volume:                          Fixed Rate System
                                                    90 Liters / Minute
                                                    24 GPM
           Tank:                                    380 Liter / 100 Gallon
           Filtration:                              Dual Parallel Bags
           Outlets:                                 3
           
           
           The J3-90 operates as three completely independent 30 liter
           (8 gpm) modules for multiple outlet machines or as a single
           90 liter (24 gpm) fixed volume unit.
           
           
           Standard Configuration:
           The ChipBLASTER J3-90 is fed by a transfer pump that draws from the machine
           
           tool sump, through the filter vessel to the integral
           380 liter (100 gal) tank. When the machine tool calls for coolant, the filter
           
           pump(s) draws the coolant from the ChipBLASTER tank
           and pumps through the post (safety) filter to the inlet of the positive
           
           displacement pump. The coolant then flows at high pressure
           through a series of distribution and safety valves and on to the machine tool.
           
           M Code Requirement:
             1 "M" Code Controlled Signal is Required to Operate as One High Volume
           
             Outlet
             3" M" Code Controlled Signals are Required to Operate as Three Independant
           
             Modules
           24 VDC, 110 VAC or 240 VAC Signal is Acceptable
           *If your machine uses pulsed "M" codes, please contact ChipBLASTER
           
           Required Electrical Power:
             74 amps, 230 VAC, 3 Phase, 60 Hz
             37 amps, 460 VAC, 3 Phase, 60 Hz
             45 amps, 400 VAC, 3 Phase, 50 Hz
           
           Ideal for Machine Tools Up to 45 Kw (60 HP), Three Turret Lathes & 50 Taper
           
           Mills.
           
           See brochure for more details and options
           
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com