General Specifications As Per Brochure
           
           Pressure:                                1500 PSI
           
           Coolant Volume:                          Automatically Variable
                                                    3 - 16 GPM
           Tank:                                    126 Gallon
           
           Filtration:                              Single bag
           Outlets:                                 1
           
           
           Standard Configuration:
           The ChipBLASTER EV-60 is fed by a transfer pump that draws from the machine
           
           tool sump, through the filter vessel to the integral 480 liter (126 gal) tank. 
           
           When the machine tool calls for coolant, the filter pump(s) draws the coolant
           
           from the ChipBLASTER tank and pumps through the post (safety) filter to the
           
           inlet of the positive displacement pump. The coolant then flows at high
           
           pressure through a series of distribution and safety valves and on to the
           
           machine tool.
           
           M Code Requirement:
           Latching "M" code controlled signals will be required for
           
           activation/deactivation of the ChipBLASTER. A 24 VDC,110 VAC or 240 VAC signal
           
           is needed.
           
           *If your machine uses pulsed "M" codes, please contact ChipBLASTER
           
           Required Electrical Power:
           52 amps, 230 VAC, 3 Phase, 60 Hz
           26 amps, 460 VAC, 3 Phase, 60 Hz
           31 amps, 400 VAC, 3 Phase, 50 Hz
           
           Ideal for machine tools up to 30 kw (40 hp)
           
           See Brochure for more details and options
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com