EQUIPPED WITH:
Thread dial, Steady rest w/rollers, Oversized steady rest w/ rollers
Taper attachment, TMX 19-5/8" four jaw chuck, Four way rapid traverse
Longitudinal carriage stop, Work light, Quick change toolpost (post only)
2 speed tailstock, Removable gap, Coolant system

SPECIFICATIONS:
Swing over bed 20-1/4" (515mm)
Swing over cross slide 11-7/8" (302mm)
Swing over gap 27-5/8" (702mm)
Length of gap 15" (380mm)
Length of gap in front of faceplate 8-3/8" (213mm)
Distance between centers 80" (2000mm)
Spindle speeds--number 18
Spindle speeds--range 11.5 to 1400 rpm
Hole thru spindle 4-1/8" (105mm)
Spindle nose type D1-8 camlock
Headstock center No 6MT
Threads per inch--number 64
--range 1/4 to 60
Metric threads--number 64
--range 0.5 to 120
Compound rest travel 5-3/8" (136mm)
Cross slide travel 12-1/8" (310mm)
Travel of spindle barrel 9-1/2" (241mm)
Diameter of spindle barrel 2-15/16" (75mm)
Taper #5 MT
Length of graduations on
tailstock barrel 6" (152mm)
Width of bed 15-3/4" (400mm)
Degrees of taper +/- 10 degrees
Maximum turning length per setting 15-3/4" (400mm)
Main drive motor 10 HP (7.5KW)
Coolant pump motor 1/4 HP (0.18KW)
Electrics 230/460/3/60
Overall (W x H x L) 48" x 67" x 154"
1220mm x 1700mm x 3900mm
Weight, approx 7,200 lbs. (3,370 kgs)

A M Metalmaq Inc
320 E 10th Ct Hialeah FL 33010-5151
Tel: 305-883-9200 Fax: 305-883-0660
Email (Request Quote): sales@ammetalmaq.com
Web: www.ammetalmaq.com