10" throat and standard accessories which include 6" x 6" angle
iron blades, 14" bar shear blade, one standard round punch and die
and 5 HP 1725 rpm motor wired for 220/3/60 ro 440/3/60 electrics


STANDARD FEATURES:
Complete punch system, Punch stripper, Fully guarded
Remote foot pedal operation, Universal open tooling station
Reversible shear blades for extended life
Low rake angle on shear blades, Fast adjusting holddown bars
Direct drive pump, Hydraulic system charged and ready to operate
Sound insulated, Tray for cut stock
Integral lifting lug for instant portability
Eletric stroke control

OPTIONAL ACCESSORIES:

Special voltage, 1 phase motor. . . . . . . . . . . . . . . . . . . $ 500.00
Auto cut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 919.00
Greaseless gibs/slides. . . . . . . . . . . . . . . . . . . . . . . POR

Quick change punch coupling--factory installed at time of purchase
of machine . . . . . . . . . . . . . . 849.00
Vee notcher 3" x 3" x 1/4". . . . . . . . . . . . . . . . . . . . . 1,399.00

Rectangular coper--2-1/2" w x 6" l x 1/2" thick . . . . . . . . . . 1,499.00

Rod shear and housing--1/4", 3/8", 1/2", 5/8". 3/4" & 1". . . . . . 1,699.00
12" brake attachment w/4 way die with 1/16", 1/8", 3/16" & 1/4" vees 1,599.00
Oversized punch assembly--to 1-9/16" round. . . . . . . . . . . . . 999.00
Pipe notcher housing (to be used with 1/2" to 2" notching dies) . . 679.00
1/2" pipe notching dies . . . . . . . . . . . . . . . . . . 729.00
3/4" pipe notching dies . . . . . . . . . . . . . . . . . . 779.00
1" pipe notching dies. . . . . . . . . . . . . . . . . . . 819.00
1-1/4" pipe notchinging dies. . . . . . . . . . . . . . . . 839.00
1-1/2" pipe notching dies . . . . . . . . . . . . . . . . . 899.00
2" pipe pe notching dies. . . . . . . . . . . . . . . . . 949.00
Pedestal die table for standard punches . . . . . . . . . . . . . . 529.00
Pedestal die table for oversized punches. . . . . . . . . . . . . . 999.00
Back gauge--up to 48" . . . . . . . . . . . . . . . . . . . . . . . 309.00

STANDARD PUNCH & DIE SETS:
Punch & die starter box (8 sets from 3/16" to 1-1/16"). . . . . . . 399.00
Round punch & die set--1/8" to 1-1/16"--per set . . . . . . . . . . 49.00
Square punch & die set--up to 3/4"--per set . . . . . . . . . . . . 169.00
Oblong punch & die set--up to 1-1/16" long--per set . . . . . . . . 199.00
Hex punch & die set---up to 29/32"--per set . . . . . . . . . . . . 249.00

OVERSIZE PUNCH & DIE SETS:
Round punch & die sets up to 1-9/16"--per set . . . . . . . . . . . 99.00
Square punch & die sets up to 1-1/16"--per set. . . . . . . . . . .
Oblong punch & die sets up to 1-1/2"--per set . . . . . . . . . . .
Hex punch & die set up to 1-1/4"--per set . . . . . . . . . . . . .


SPECIFICATIONS:
PUNCH STATION:
Tonnage 100
Throat 11"
Capacity 1-1/16" hole thru 1" plate
Largest punch accepted with
--standard punch holder 1-1/16"
--oversized punch holder 1-9/16"
Largest die accepted with
--standard die holder 1-1/8"
--oversized die holder 1-5/8"
Open height 8-3/4"
Shut height 6-15/16"
Stroke 1-13/16"

BAR SHEAR
Maximum cutting length 14"
Cutting capacity--maximum width 3/4" x 14"
--maximum thickness 1" x 10"
Maximum bar shearing--round 1-1/4"

ANGLE SHEAR
Maximum angle @ 90 degree 6" x 6" x 1/2"

RECTANGULAR COPER (Optional)
Maximum cut 2-1/2" x 6" x 1/2"

92 DEGREE NOTCHER (Optional)
Maximum cut 3" x 3" x 1/4"

MOTOR & ELECTRICS
Motor power 7.5 HP
Electrics--standard 208-220/3/60

DIMENSIONS
Base dimensinsions 45" x 56"
Overall height 62"
Net weight 4,650 lbs

A M Metalmaq Inc
320 E 10th Ct Hialeah FL 33010-5151
Tel: 305-883-9200 Fax: 305-883-0660
Email (Request Quote): sales@ammetalmaq.com
Web: www.ammetalmaq.com