OPTIONAL ACCESSORIES:
3 jaw chuck (4") with back plate. . . . . . . . . . . . . . . . . . $ 350.00
4 jaw chuck (4") with back plate. . . . . . . . . . . . . . . . . . 310.00
5C collet set (1/8" to 1-1/16") . . . . . . . . . . . . . . . . . . 180.00
Balancing stand . . . . . . . . . . . . . . . . . . . . . . . . . . 290.00
Coolant system with paper filter. . . . . . . . . . . . . . . . . . 1,800.00
Coolant system with paper filter and magnetic separator . . . . . . 2,500.00
Internal grinding attachment. . . . . . . . . . . . . . . . . . . . 3,800.00
Spare wheel adapter (flange). . . . . . . . . . . . . . . . . . . . 310.00
Newall C80 digital readout with 0.00005" resolution, installed. . . 2,400.00

STANDARD ACCESSORIES:
5C lever type collet closer, Auto lube system, Coolant system,
Grinding wheel with flange, Wheel extractor, Carbide tip center,
Balancing arbor with stand, Wheel dresser and toolbox & tools

SPECIFICATIONS:
CAPACITY:
Swing over table 6"
Distance between centers 18"
Maximum weight capacity 110 lbs.

WHEELHEAD:
Infeed range 4.2"
Manual feed, graduation (dia.) 0.0002"
Manual feed, revolution (dia.) 0.1"
Swivel angle +8 / -12 degrees

GRINDING WHEEL:
OD x W x Bore 12" x 1" x 3"
Maximum grinding length 2.75"
Spindle speed 14,000 rpm
ID wheel motor 1/2 HP

WORKHEAD:
Spindle speed--number Varispeed
--range 0 to 520 rpm
Swivel towards and away from operator 45 degrees
Taper of center 5C

TABLE:
Auto speed (varaible speed) 0 to 20 IPM
Manual feed per revolution 3/8"
Table swivel +/- 8 degrees

TAILSTOCK:
Spindle stroke 1"
Spindle taper #2 MT

MOTORS:
Wheel drive 2 HP
Workhead drive 1/4 HP
Hydraulic pump 1/4 HP

DIMENSIONS:
Shipping (L x W x H) 48" x 81" x 52"
Weight 2,300 lbs.

A M Metalmaq Inc
320 E 10th Ct Hialeah FL 33010-5151
Tel: 305-883-9200 Fax: 305-883-0660
Email (Request Quote): sales@ammetalmaq.com
Web: www.ammetalmaq.com