To the best of our knowledge all details listed below are deemed correct.
           It is the buyers responsibility to confirm ALL details prior to purchase.
           
           Equipped With:
              Fagor 8055TC Control (Conversational & Teach Control Function)
              Hand Controls Mounted on Carriage
              10" 3-Jaw Scroll Chuck, D1-6 mount 
              4-Way Programmable Automatics Electric Tool Post
              Left or right-hand Threading, single or multiple-start threading
              Inch / Metric Threading
              Tail Stock w/ MT5 Live Center 
              Built-in Coolant System 
              Fluorescent Work Light 
              Machine Condition Display Lamp 
              2-Automatic Gear Ranges for High torquye 
              15hp Peak (10-HP 30-min) Inverter Spindle Motor
              Dual Sliding Door 
           
           Machine is in LIKE NEW Condition
           Less the 50 hours run hours
           
           Replacement cost: $43,485.00
           
           ===================
           
           
           General Specifications:
           Capacities:
              Swing Over Bed:                        18" (460mm)
              Swing Over Cross Slide:                9" (230mm)
              Center Height:                         9" (230mm)
              Center Distance:                       39.37" (1000mm)
              Bed Length:                            82.5" (2095mm)
              Bed Way Width:                         14-1/2" (370mm)
              Bed Casting Depth:                     13-3/8" (340mm)
           
           Spindle:
              Spindle Motor:                         10-HP (15 HP Peak) (7.5Kw)
              Spindle Speeds:                        43-2,500 RPM infinitely variable
           
              Spindle Speed Per Gear Range:          L= 43-850, H= 125-2500 RPM
              Constant Torque Ranges:                L= 43-270, H= 125-800 RPM
              Constant Power Ranges:                 L= 270-850 H= 800-2500 RPM
              Spindle Bore:                          2-3/8" (2.385") (60mm)
              Spindle Nose - Camlock:                D1-6 Camlock
              Spindle ID Taper in Spindle Nose:      MT-6 MT#6
           
           Cross Slide:
              Rapid Traverse Feedrate:               393 IPM (10m/min)
              X-Axis Motor:                          2-HP (1.5kW) Absolute type
              Cross Slide Travel:                    10.63" (270mm)
              Cross Slide Dimensions:                8.26" x 27.5" (210 x 700mm)
              Cross Slide Ballscrew Diameter:        1" (25mm)
              Cross Slide Ballscrew Pitch:           5mm Accuracy Grade C3
              Cross Slide Thrust:                    2860 ft. lbs. (1300Kg Force)
           
           Carriage:
              Rapid Traverse Feedrate:               472 IPM (12m/min)
              Z-Axis Motor:                          2-HP (1.5kW) Absolute type
              Z-Axis Travel:                         38.58" (980mm)
              Cutting Tool Height:                   1.5" (38mm)
              Carriage Ballscrew Diameter:           1-5/16" (36mm)
              Carriage Ball Screw Pitch:             10mm Accuracy Grade C3
              Carriage Slide Thrust:                 6,200 ft. lbs. (2850Kg Force)
           
           Tailstock
              Quill Diameter:                        2-15/16" (75mm)
              Quill Stroke:                          6-5/16" (160mm)
              Quill Taper:                           MT-5 Morse Taper # 5
              Tailstock Body Set-Over Adjustment:    3/8" (  10mm)
           
           Machine:  108" x 60" x 80" 5,500 lbs; currently bolted to a shipping pallet 
           
           
           

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com