Maximum swing........................... 42.13"
Maximum machining diameter.............. 42.13"
Maximum machining length................ 239.93"
X-axis travel........................... 40.35"
Z-axis travel........................... 242.91
Y-axis travel........................... 26.38"
W-axis travel........................... 198.98"
B-axis travel........................... -30 to 210 degrees
B-axis contouring....................... 0.0001 degrees
C-axis travel........................... 0.0001 degrees
Spindle:
Max spindle speed....................... 750 RPM
Spindle nose............................ A2-20
Spindle bore............................ 12.5"
Spindle motor........................... 60 HP
Milling Spindle:
Spindle speed........................... 10,000 RPM
Milling motor........................... 50 HP
Magazine tool changer Positions......... 160
Spindle taper........................... Capto C8
Tailstock taper......................... MT6

Approximate machine size: 480.3" x 200.8" x 153" H
Approximate machine weight: 96,000 lbs

Equipped with:
- Mazak Matrix 2 cnc control with the following options:
- Thread start - Re-Threading - Simultaneous 5 axis - 5-axis Spline
- EIA - High Smoothing Control - EIA 3D Comp - Program Memory Expansion
- Long boring bar system (3 position)
- Tailstock
- Two (2) 24" 4-jaw KAWATA chucks (front & rear) with 12.5" bore
- Tool eye
- 1,000 psi Super Flow coolant unit
- Scale feedback system on X,Y & Z axis
- Two (2) Independent dual LNS hydraulic steady rests with tandem brackets
- MP-250 tool probe
- Chip conveyor

Inspect under power in a CT shop. Super clean low hour machine with
only 1,732 cutting hours.

New cost was over 2 Million Dollars

Prime Machinery Inc
62 South St Oyster Bay NY 11771-1524
Tel: 516-922-7977 Fax: 516-922-9691
Email (Request Quote): Sales@Primemach.com
Web: www.Primemach.com