View a video demonstration of this machine by clicking the link below:
          
          https://youtu.be/yC-peS6APoM
          
          To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
          
          Equipped With:
             Fanuc OiM-D Control - Package A
          
          General Specifications Per OEM Brochure:
             X-Axis Travel:                         43.3" (1,100mm)
             Y-Axis Travel:                         25.6" (650mm)
             Z-Axis Travel:                         23.6" (600mm)
             Distance - Spindle Nose to Table:      4.9" - 28.5" (125-725mm)
             Distance - Spindle Center to Column:   25.6" (650mm)
          
          Table
             Table Size:                            51.2" x 25.6" (1300 x 650mm)
             Table Load:                            2,425 lbs (1,100kg)
             T-Slot Size (Width/Distance/Number):   0.71" x 4.92" x 5
             Table Height from Plant Floor:         35.4" (900mm)
          
          Spindle
             Taper:                                 CAT40,CAT50
             Spindle Motor (Gearbox):               15/20 HP (11/15kW)
             Spindle Motor (Direct Drive):          20/25HP (15/18.5kW)
             Spindle Speed (Direct Drive - CT40):   12,000 RPM
             Spindle Speed (Gearbox Only -  CT50):  6,000 RPM
             Spindle Speed (Gearbox -  CT40):       8,000 RPM
             Spindle Output Torque (Direct Drive):  CT40 - 92 ft lbs (125Nm)
             Spindle Output Torque (CT40 & CT50):   282 ft lbs (380 Nm)
             Spindle Bearing Dia. (Direct Drive):   CT40 - 2.75" (70mm)
             Spindle Bearing Dia. (CT40):           2.95" (75mm)
             Spindle Bearing Dia. (CT50):           3.35" (85mm)
          
          Feed Rates
             Rapid Feedrate (X&Y Axis):             1,181 IPM (30 m/min)
             Rapid Feedrate (Z Axis):               945 IPM (24 m/min)
             Cutting Feedrate:                      945 IPM (24 m/min)
          
          Accuracy
             Positioning Accuracy:                  +.0002" (+.005mm)
             Repeatability:                         +.0001" (+.003mm)
          
          Coolant System
             Coolant Tank Capacity:                 113.5 Gallons
             Flood Coolant (GPM):                   20 Gallons
             CTS Preperation Only:                  1,000 PSI Capable 
          
          ACT - 24 Tool "Drum" Type With "S" Cam Drive
             Tool Magazine Capacity - CT40:         24
             Tool Magazine Capacity - CT50:         24
             Tool Diameter - CT40:                  2.99" (127mm)
             Tool Diameter - CT50:                  5" (127mm)
             Tool Diameter - Empty Pocket - CT40:   5" (127mm)
             Tool Diameter - Empty Pocket - CT50:   9" (229mm)
             Tool Length from Gage Line - CT40:     9.8" (250mm)
             Tool Length from Gage Line - CT50:     11.8" (300mm)
             Tool Weight - CT40:                    15.4 lbs (7kg)
             Tool Weight - CT50:                    33 lbs (15kg)
             Tool Taper:                            CT40/50
             Tool Change Time: Tool to Tool:        3 Seconds
             Tool Selection:                        Random
             Tool Access:                           Bi-Directional
          
          Utilities
             Power Required:                        3 Phase, +10%, 220V (35KVA)
             Air Pressure:                          100 PSI
             Power Supply Frequency:                50/60 Hz
             Control Voltage:                       24 Volt
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): blandon@automatics.com
Web: www.automatics.com