To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
          
          Model no. DMC 60T
          Serial no. 11430002093
          Replacement cost is US$480,000.00. 
          EXCELLENT condition, only 11,818 operating hours. 
          
          -Can be seen running in Newmarket, Ontario, CANADA. 
          
          Specifications: 
          Made in Pfronten, Germany. 
          
          WORKING RANGE- 
            Traverse range X (longitudinal)             30.71" (780 mm) 
            Traverse range Y (transverse)               22.05" (560 mm) 
            Traverse range Z (vertical)                 22.05" (560 mm) 
            Volume machining area                       245 dm-3 
            Max workpiece dimensions                    23.62"(600mm)diameter
                                                        22.64"(575mm)height
                                                        882 lbs(400kg) 
            ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)- 
            Stable compact construction with optimal linkage to guideway (Y-Axis) 
            NC rotary table with direct measuring system 
            Backlash-free preloaded precision spur gear for high rigidity, precision and
          
          high torque, maximum holding momentum in closed loop 
            High rapid feed rate 
            Note this machine is equipped w/the optional 100mm distance T-slot pallets 
            Pallet changer allows setup during production time 
            Rotation range                              360 x 0.001 degree (Full 4th Axis) 
            Clamping Surface                            19.7" x 24.8" (500 mm x 630 mm) 
            Number of Pallets                           2 
            Maximum table load                          880 lbs (400 kg) 
            Centre bush                                 2" (50 mm) diameter 
            Torque 40% duty cycle                       1,807 ft lbs (2,450 Nm) 
            Holding momentum 40%                        1,807 ft lbs (2,450 Nm) 
            Maximum feed                                7,200 degrees per minute 
            Maximum table speed                         30 rpm 
            Positional uncertainty P                    7 arc sec 
            Pallet change time                          Approximately 10 seconds 
            SWIVEL MILLING HEAD WITH PROGRAMMABLE B-AXIS- 
            Integrated 12,000 rpm motor spindle 
            High pressure coolant supply centrally through spindle centre 
            Swivel Range                                150 degrees (-120/+30 degrees) 
          (30 degrees past horizontal,horizontal,vertical,30 degrees past vertical) 
          150 degree swivel range allows UNDERCUTS and machining at NEGATIVE ANGLES 
          due to the swivel range of 30 degrees across the horizontal or vertical
          
          axis.This gives you advanced flexibility for complex parts like impellers. 
          Swivel momentum milling spindle (40% duty cycle) 1,620 ft lbs (2,200 Nm) 
          Holding momentum without clamping (40% duty cycle) 1,438 ft lbs (1,950 Nm) 
            Holding momentum with clamping              2,655 ft lbs (3,600 Nm) 
            Rapid motion B-axis                         35 rpm 
            Swivelling time of the head from horizontal-vertical & vice versa 1.5 secs 
            Positional uncertainty P                    9 arc seconds 
            INTEGRATED MOTOR SPINDLE- 
            Type                                        Digitally controlled 
            Cooled drive                                Water 
            Power 40% ED                                37.55 hp (28 kW) 
            Power 100% ED                               25.5 hp (19 kW) 
            Spindle speed range                         12,000 rpm 
            Acceleration/deceleration 0-12,000 rpm      2 seconds 
            Number of gear steps                        None 
            Spindle torque 40% ED                       89 ft lb (121 Nm) 
            Spindle torque 100% ED                      60.48 ft lb (82 Nm) 
            Spindle bearing diameter (front/rear)       3.15"/2.16" (80/55 mm) 
            Spindle Taper                               CAT40 
            Clamping power                              8 kN 
          
          FEED DRIVES
            Drive cooled X/Y/Z                          Air/Air/Water 
            Feed Rate X/Y/Z                             590 ipm (15 m/min) 
            Rapid Feed Rate X/Y/Z                       1,968 ipm (50 m/min) 
            Maximum Feed Rate X/Y/Z                     1,968 ipm (50 m/min) 
            ACCELERATION X/Y/Z                          0.6 g IN ALL AXES 
            Feed Power X/Y/Z                            7/7.2/10 kN 
            Ball Screw Spindle X/Y                      1.57"x0.8" (40x20 mm)
            Ball Screw Spindle Z                        1.97"x0.8"(50x20mm)
            VERTICAL CHAIN AUTOMATIC TOOL CHANGER- 
            Magazine pockets                            60
            Maximum tool weight                         17.64 lbs (8 kg) 
            Maximum tool diameter without free pockets  3.15" (80 mm) 
            Maximum tool diameter with free pockets     6.3" (160 mm) 
            Maximum tool length                         12.4" (315 mm) 
            Tool change time Approximately 0.8 seconds, double gripper tool changer 
            Chip-to-chip time Approximately 4 seconds vertical, 10 seconds horizontal 
            EXTERNAL COOLANT SUPPLY ON THE OUTSIDE OF THE SPINDLE- 
            Pump output                                 10.6 gallon/minute (40 l/min) 
            Pump pressure                               22 PSI (1.5 bar) 
          
          PRODUCTION PACKAGE- 
            238 gallon (900 l) coolant unit capacity 
            Automatic paper filter cleaning with fine filtering of the complete 
          emulsion to less than 50 um 
            Cleaning of the spindle by spindle air blast for high precision also
          for cleaning with frequent tool changes 
            580 PSI (40 bar) 6 gallon/min (23 l/min) coolant thru the spindle centre 
            Rotating clear-view window in cabin pane 
            Chip flushing inside work cabin 
            Chip conveyor 
          
          INSTALLATION DATA- 
            Operation voltage..... 400 V input (comes with multi input transformer) 
            Control voltage                             24 V 
            Max at 100% duty cycle                      100 A 
            Power consumption at 100% duty cycle        64 kVA 
            Recommended net protection                  100 A 
            Recommended short circuit                   3.6 MVA 
            Compressed air required                     87 PSI (6 bar) 
            Air consumption (average value)             20 m-3/h 
            Air consumption with tool cooling           40 m-3/h 
            Total weight with pallet changer            Approximately 22,000 lbs (9 tons) 
          3-point support with 3 leveling shoes, no special foundation required 
          
          MACHINE IS EQUIPPED WITH
            Heidenhain iTNC530 CNC Control with HR410 electronic handwheel 
            Blum Laser tool length and diameter measuring, horizontal/vertical 
            Air blast through spindle centre, selected with M-function 
            Spay pistol with pump 
            Multi input transformer 
            Heidenhain glass scales direct measuring system X/Y/Z Axes 
            Heidenhain rotary encoders direct measuring system B/C Axes 
            External coolant nozzles on outside of spindle air/coolant selectable 
            Automatic switch-off of positive air pressure for the main spindle after work
          
          end 
            Linear roller guideways and digital drives. Stability and high precision are
          
          ensured with roller guideways with over-dimensioned distances between the
          
          guideways. The table centre of gravity moves in between the vertical guideways
          
          (Z-Axis). 
            Electronic temperature compensation 
            Spindle chiller 
            Manuals and cd 
            Full enclosure of machining area for safety and noise reduction 
            Sensitive machine parts (measuring systems, limit switches, guide-ways,
          
          drives) are separate from the machining area 
            Automatic pallet changer.
          
          ITEMS TO SHIP
            1/4: DMG DMC60T: Approx 152" L X 134" W X 100" H, 22,000 lbs 
            2/4: COOLANT TANK: Approx 90" L X 56" W X 66" H, 1,500 lbs 
            3/4: CHIP CONVEYOR: Approx 127" L X 27" W X 77" H, 1,000 lbs 
            4/4: TRANSFORMER ON SKID: Approx 48" square, 500 lbs 
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): nick@automatics.com
Web: www.automatics.com