GENERAL SPECIFICATIONS:

MANUFACTURER - STAMCO
YEAR - 1992
LINE DIRECTION - LEFT to RIGHT (TURNSTILES LOAD AND UNLOAD ON DRIVE SIDE)
MATERIALS - C.R.S, HRP&O, HOT DIP GALV., ELECTRO GALV., PRE-PAINTED
THICKNESS - .015" MIN., .135" MAX.
SHEAR STRENGTH - 40,000 PSI MIN., 90,000 PSI MAX.
YIELD STRENGTH - 35,000 PSI MIN., 90,000 PSI MAX.
COIL WIDTH - 12" MIN., 72" MAX. (74" UNTRIMMED)
COIL WEIGHT - 65,000# MAX. (ENTRY & EXIT)
COIL OUTSIDE DIAMETER - 36" MIN., 80" MAX. (ENTRY & EXIT)
COIL INSIDE DIAMETER (ENTRY) - 20" TO 24" (28" TO 32" w/ FILLER PLATES)
COIL INSIDE DIAMETER (EXIT) - 20" or 24" (VIA QUICK CHANGE "QUILL" TYPE DRUMS)
SLITTER ARBOR DIAMETER - 8.000"
NUMBER OF (PACKED ARBOR) SLITTER HEADS - TWO (2)
NUMBER OF EDGE TRIMMER HEADS - ONE (1)
SLITTER HEAD EXCHANGE STYLE - INJECTOR w/ ROTATING CAROUSEL TRAY
LINE SPEED - 500 FPM MAX. (LOW GEAR), 1000 FPM MAX. (HIGH GEAR)
UNCOILER DRIVE - 200 HP DC FEED-UP DRIVE / DRAG GENERATOR BRAKE
SLITTER DRIVE - 125 HP DC
SCRAP BALLER DRIVE - AC MOTOR
ROLL TENSION STAND DRIVE - 125 HP DC FEED-UP DRIVE / DRAG GENERATOR BRAKE
RECOILER DRIVE - 200 HP DC

LINE COMPONENTS:

FOUR ARM ENTRY STORAGE TURNSTILE

FLOOR LEVEL COIL LOADING CAR

CANTILEVERED MANDREL UNCOILER w/ 20" / 24" HYDRAULIC DRUM, SLIDE BASE, HOLD-

DOWN ROLL AND 125 HP FEED-UP DRIVE / DRAG GENERATOR BRAKE

UNCOILER OUTBOARD SUPPORT

BOLT-ON PLASTIC UNCOILER FILLER PLATES FOR 28" TO 32" ID COILS

"NORTH AMERICAN" ELECTRONIC EDGE CONTROL SYSTEM

DUAL PIVOTING AND TELESCOPING PEELER BLADES TO ACCOMMODATE UNDER AND OVER

WINDING FROM UNCOILER

ENTRY PINCH ROLLS

ENTRY CROP SHEAR w/ THREADING TABLE AND SCRAP CART

"LORAL" NON-CONTACT THICKNESS MEASUREMENT SYSTEM

ROLLER TYPE SIDE GUIDES

PIVOTING SLITTER ENTRY BRIDLE ROLL

SLITTER BASE AND 125 HP DC DRIVE

TWO (2) PACKED ARBOR INJECTOR SLITTER HEADS w/ 8.000" ARBORS

ONE (1) SIDE TRIMMING INJECTOR HEAD

POWERED SLITTER HEAD INJECTOR SYSTEM

SLITTER HEAD STORAGE TRAY w/ THREE (3) STORAGE POSITIONS

ONE (1) LOT of SLITTER AND SEPARATOR TOOLING w/ CABINETS

HEAVY-DUTY EDGE TRIM SCRAP BALLER SYSTEM

PIVOTING PIT THREADING TABLES

DUAL STRIP SEPARATOR SPINDLES w/ QUICK CHANGE TOOLING SYSTEM AND STRIP SNUBBER

ROLL

ROLL TYPE TENSION STAND w/ 125 HP DC FEED-UP DRIVE / DRAG GENERATOR BRAKE

TAIL CLAMPING PAD

THIRTEEN (13) ROLL SHAPE CORRECTION LEVELER w/ QUICK CHANGE CASSETTE

EXIT CROP SHEAR AND SCRAP CART

PIVOTING SCRAP / STRIP INSPECTION TABLE w/ OVERHEAD LIGHTS

EXIT PASS LINE ROLL

PIVOTING RECOILER THREADING TABLE w/ PIVOTING STRIP HOLD-DOWN CLAMP

20" / 24" QUILL TYPE DRUM TURRET RECOILER DRIVE BASE w/ SLIDING COUPLING AND

200 HP DC DRIVE

TURRET RECOILER ROTATING BASE w/ TWO (2) HOLLOW-BORE DRUM FRAMES, TWO (2)

PIVOTING OVERARM SEPARATORS AND TWO (2) COIL PUSHERS

FLOOR LEVEL COIL UNLOADING CAR w/ POWERED COIL STABILIZING CLAMP

"IN-FLOOR" POWERED TURNTABLE TO ROTATE COIL CAR NINETY (90) DEGREES

"IN-FLOOR" SCALE TO MEASURE EXIT COIL WEIGHT

FOUR (4) ARM EXIT STORAGE TURNSTILE

OPERATOR CONTROL STATIONS

AC CONTROLS

VARIABLE SPEED DRIVE CONTROLS

CLOSED LOOP HYDRAULIC SYSTEM

National Machinery Exchange
158 Paris St Newark NJ 07105-3833
Tel: 973-344-6100 Fax: 973-589-0944
Email (Request Quote): sales@nationalmachy.com
Web: www.nationalmachy.com