Machine Tools·Horizontal Lathe

14" x 40" cc, ACER, #1440G, New

Sold by A M Metalmaq·Available·Last verified 4h ago

Manufacturer: ACER
Model: 1440G
Condition: New

Description

14" x 40" cc, ACER, #1440G, New OPTIONAL ACCESSORIES: Four (4) position carriage stop . . . . . . . . . . . . . . . . . . 350.00 DORIAN D30-BXA-BS quick change tool post with 4 tool holders. . . . 875.00 Machined T nut for the above at Dorian. . . . . . . . . . . . . . . 60.00 5C lever operated collet chuck. . . . . . . . . . . . . . . . . . . 1,250.00 Taper turning attachment (not installed). . . . . . . . . . . . . . 800.00 Installation Fee for taper turning attachment . . . . . . . . . . . 250.00 NEWALL "Topaz Lathe" two axis DRO, 8" x 40"--installed. . . . . . . 2,650.00 Freight from New Jersey to Miami. . . . . . . . . . . . . . . . . . 800.00 ELECTRICS: 220/440 volts, 3 phase, 60 Hz. STANDARD ACCESSORIES: Removable gap, One piece Cast-Iron Base Hardened and ground bedways, 1-9/16" spindle bore Spindle mounted with precision tapered roller bearings 6" diameter universal 3 jaw chuck 8" diameter four chuck chuck Slotted face plate--12" diameter Steady rest (0.4" to 4.3"), Four way toolpost Built in coolant system, Halogen Light, Foot brake D1-4 Camlock Spindle Nose, 3HP main motor Enclosed feed/thread gearbox providing inch & metric threads Built-in safety overload friction clutch in apron Headstock ground gears Tailstock barrel with inch/metric graduations Full length splash guard Operation and service manual SPECIFICATIONS: Swing over bed 14" Swing over cross slide 9" Swing in gap 21" Distance between centers 40" Spindle hole 1-9/16" Spindle nose D1-4 camlock Spindle speeds--number 8 --range 65 to 2000 rpm Inch threads--number 32 --range 3 to 56 tpi Metric threads--number 22 --range 0.25 to 6 mm Feeds--number --range (longitudinal) .002" to .04" rev --range (cross) .001" to .02" rev. Bed width 10" Bed length 58" Tailstock taper #3 MT Tailstock spindle travel 4-1/4" Spindle diameter 1-1/2" Main motor power 3 HP

Specifications

Bed Length Inches	58
Bed Width Inches	10
Condition	new
Distance Between Centers Inches	40
Feed Cross Max Inches Per Rev	0.02
Feed Cross Min Inches Per Rev	0.001
Feed Longitudinal Max Inches Per Rev	0.04
Feed Longitudinal Min Inches Per Rev	0.002
Frequency (Hz)	60
Inch Threads Count	32
Inch Threads Max Tpi	56
Inch Threads Min Tpi	3
Main Motor Power (hp)	3
Main Motor Power (kW)	2.237
Metric Threads Count	22
Metric Threads Max (mm)	6
Metric Threads Min (mm)	0.25
Phase	3
Spindle Diameter Inches	1.5
Spindle Hole Inches	1.563
Spindle Nose	D1-4 camlock
Spindle Speed Max (RPM)	2,000
Spindle Speed Min (RPM)	65
Spindle Speeds Count	8
Swing In Gap Inches	21
Swing Over Bed Inches	14
Swing Over Cross Slide Inches	9
Tailstock Spindle Travel Inches	4.25
Tailstock Taper	MT3
Voltage (v)	220/440