Machine Tools·Horizontal Lathe

ACER 29" Series Lathes

Sold by A M Metalmaq·Available·Last verified 3h ago

Manufacturer: ACER
Model: Dynamic 29 Series
Condition: New

Description

ACER 29" Series Lathes Dynamic 2960G. . . $ 45,000.00 Dynamic 29120G $ 51,700.00 Dynamic 2980G. . . $ 47,450.00 Dynamic 29160 $ 57,550.00 OPTIONAL ACCESSORIES: 24" 4 jaw independent chuck, D1-11, with direct mount . . . . . . . 5,750.00 24" face plate. . . . . . . . . . . . . . . . . . . . . . . . . . . 1,500.00 Micrometer carriage stop. . . . . . . . . . . . . . . . . . . . . . 450.00 Six (6) position carriage stop. . . . . . . . . . . . . . . . . . . 525.00 Taper turning attachment (installed). . . . . . . . . . . . . . . . 3,100.00 DORIAN quick change tool post with 6 tool holders (DA). . . . . . . 2,750.00 NEWALL NMS800 "LATHEPAC" digital readout system--installed. . . 60" 4,250.00 Newall NMS800 "LATHEPAC" digital readout system--installed. . . 80" 5,200.00 Newall NMS800 "LATHEPAC" digital readout system--installed. . .120" 6,200.00 Newall NMS800 "LATHEPAC" digital readout system--installed. . .160" 7,550.00 Inbound freight to Miami, FL. . . . . . . . . . . . . . . .starting 3,000.00 FLOOR DIMENSION: 11O" x 50", 129" x 50", 169" x 50", 209" x 50" NET WEIGHT: (7,650LBS) (7,680LBS) (9,190LBS) (10,070LBS) STANDARD ACCESSORIES: Removable gap, Steady rest with roller jaws, 20" 4 jaw chuck (D1-11), Coolant system, Halogen light, Full length splash guard, 12" adapter plate, Assorted tools, Operation and service manual, Four way toolpost, Automatic longitudinal multiple feed stop, 16" drive plate, Rapid crossfeed & carriage traverse, 20" face plate, Follow rest MACHINE FEATURES: 15 HP single speed motor, Ampere meter, Hardened and ground bedways Inch and metric threading (no gear change required), Dual inch/metric dials on cross slide & compound (inch dial only on longitudinal handwheel) Removable chip pan, Headstock with magnetic clutch & electric brake Chuck guard with emergency stop, 4-1/8" spindle bore SPECIFICATIONS: Swing over bed 29-1/8" Swing over cross slide 20-1/2" Swing in gap 37-25/32" Spindle hole 4-1/8" Spindle nose D1-11 camlock Spindle speeds--number 12 --range 25 to 1200 rpm Inch threads--number 45 --range 2 to 56 tpi Metric threads--number 31 --range 0.5 to to 14 mm Feeds--number --range (longitgitudinal) .0012" to .0287" --range (cross) .0004" to .0118" Bed width 16-1/2" Tailstock taper #5 MT Spindle travel 7" Spindle diameter 3-1/32" Main motor power 15 HP Electrics 220/440/3/60 HZ

Specifications

Bed Width (mm)	419.1
Cross Feed Max (mm)	0.3
Cross Feed Min (mm)	0.01
Frequency (Hz)	60
Inch Threads Count	45
Inch Threads Max Tpi	56
Inch Threads Min Tpi	2
Longitudinal Feed Max (mm)	0.729
Longitudinal Feed Min (mm)	0.03
Main Motor Power (kW)	11.186
Metric Threads Count	31
Metric Threads Max (mm)	14
Metric Threads Min (mm)	0.5
Phase	3
Spindle Bore (mm)	104.648
Spindle Diameter (mm)	77.038
Spindle Nose	D1-11 camlock
Spindle Speed Max (RPM)	1,200
Spindle Speed Min (RPM)	25
Spindle Speeds Count	12
Spindle Travel (mm)	177.8
Swing In Gap (mm)	960.502
Swing Over Bed (mm)	739.395
Swing Over Cross Slide (mm)	520.7
Tailstock Taper	MT5
Voltage (v)	220/440