Machine Tools·Horizontal Lathe

ACER 24" SERIES LATHES

Sold by A M Metalmaq·Available·Last verified 3h ago

Manufacturer: ACER
Model: DYNAMIC 24 Series
Condition: New

Description

ACER 24" SERIES LATHES DYNAMIC 2460. . . $36,650.00 DYNAMIC 24120 $42,350.00 DYNAMIC 2480. . . $38,950.00 DYNAMIC 24160 $47,650.00 OPTIONAL ACCESSORIES: 12" diameter 3 jaw chuck, direct D1-11 mount. . . . . . . . . . . $ POR 24" 4 jaw independent chuck, D1-11, with direct mount . . . . . . 4,800.00 Taper turning attachment. . . . . . . . . . . . . . . . . . . . . 2,900.00 DORIAN quick change tool post with 4 tool holders (SD50DA-CS) . . 2,750.00 NEWALL NMS800 "LATHEPAC" digital readout system--installed. . 60" 4,018.00 NEWALL NMS800 "LATHEPAC" digital readout system--installed. . 80" 4,658.00 NEWALL NMS800 "LATHEPAC" digital readout system--installed. .120" 6,286.00 NEWALL NMS800 "LATHEPAC" digital readout system--installed. .160" 7,550.00 Estimated freight charge, California to your Miami. . . .starting 2,500.00 F.O.B.: California TERMS: 25% with order, balance before shipment from California DELIVERY: 90-120 days after receipt of order FLOOR DIMENSION: 110" x 50", 129" X 50", 169" x 50", 209" x 50" NET WEIGHT: (7,150 LBS) (7,180 LBS) (8,690 LBS) (9,570 LBS) STANDARD ACCESSORIES: Steady rest with roller jaws, Follow rest, 20" 4 jaw chuck (D1-11) 20" face plate, Coolant system, Halogen light, Full lenth splash guard on 60" and 80" center lathes, Followable 34" wide splash guard on 120" and 160" center lathes, Chuck guard with emergency stop, Four way toolpost, 12" adaptor plate, 16" drive plate, Longitudinal carriage stop, Micrometer carriage stop, Assorted tools, Operation and service manual MACHINE FEATURES: 15 HP single speed motor, Ampere meter, Hardened and ground bedways Inch and metric threading (no gear change required), Dual inch/metric dials on cross slide & compound (inch on longitudinal handwheel), Removable chip pan, Headstock with magnetic clutch & electrical brake Rapid crossfeed & carriage traverse SPECIFICATION: Swing over bed 23-5/8" Swing over the crosslide 15" Swing over gap 32-1/4" Distance between centers 60", 80", 120", 160" Spindle hole 4-1/8" Spindle nose D1-11 camlock Spindle speeds--number 12 --range 25 to 1200 rpm Inch threads--number 45 --range 2 to 56 tpi Metric threads--number 31 --range 0.5 to 14 mm Feeds--number --range (longitudinal) .0012" to .0287" --range (cross) .0004" to .0118" Bed width 16-1/2" Tailstock taper #5 MT Spindle travel 7" Spindle diameter 3-1/32" Main motor power 15 HP ELECTRICS: 220/440/3/60 HZ

Specifications

Bed Width (mm)	419.1
Cross Feed Max (mm)	0.3
Cross Feed Min (mm)	0.01
Distance Between Centers (mm)	4,064
Floor Dimension Length (mm)	5,334
Floor Dimension Width (mm)	1,270
Frequency (Hz)	60
Inch Threads Count	45
Inch Threads Max Tpi	56
Inch Threads Min Tpi	2
Longitudinal Feed Max (mm)	0.729
Longitudinal Feed Min (mm)	0.03
Main Motor Power (kW)	11.186
Metric Threads Count	31
Metric Threads Max (mm)	14
Metric Threads Min (mm)	0.5
Net Weight (kg)	3,243.5
Phase	3
Spindle Diameter (mm)	77.038
Spindle Hole (mm)	104.648
Spindle Nose	D1-11 camlock
Spindle Speed Max (RPM)	1,200
Spindle Speed Min (RPM)	25
Spindle Speeds Count	12
Spindle Travel (mm)	177.8
Swing Over Bed (mm)	600.075
Swing Over Crossslide (mm)	381
Swing Over Gap (mm)	819.15
Tailstock Taper	MT5
Voltage (v)	220/440