Machine Tools·Turning Center

DMG MORI NLX2000Y/500,8"CHUCK,LIVE-MILLING-C-AXIS,CELOS,NEW-2015

Sold by Pride Machinery·Available·Last verified 4h ago

Manufacturer: DMG MORI
Model: NLX2000Y/500
Year: 2015
Condition: Used

Description

DMG MORI NLX2000Y/500,8"CHUCK,LIVE-MILLING-C-AXIS,CELOS,NEW-2015 DMG MORI NLX2000Y/500 4 AXIS TURNING CENTER Specifications: SWING OVER BED ......................................... 36.4" SWING OVER CROSS SLIDE ................................. 29.7" MAX TURNING DIAMETER ................................... 14" MAX TURNING LENGTH ..................................... 20" BAR WORK CAPACITY ...................................... 2.5" X-AXIS TRAVEL .......................................... 10.2" Z-AXIS TRAVEL .......................................... 23.2" Y-AXIS TRAVEL .......................................... 3.9" +- 2" MAX SPINDLE SPEED ...................................... 5,000 RPM TYPE OF SPINDLE NOSE ................................... JIS A2-6 NUMBER OF TOOL STATIONS ................................ 12 SHANK HEIGHT FOR SQUARE TOOL ........................... 1" MAX ROTARY TOOL SPINDLE SPEED .......................... 10,000 RPM FEEDRATE RAPID TRAVERESE X/Y/Z/TS ... 1181/393.7/1181/275.6/C-AX-400 IPM TAILSTOCK TRAVEL ....................................... 22.2" TAPER HOLE OF TAILSTOCK SPINDLE ........................ MT#4 SPINDLE MOTOR .......................................... 30/20 ROTARY TOOL SPINDLE DRIVE MOTOR ........................ 10.7/7.5 MACHINE SIZE ........................................... 120" X 82" X 84.4" MASS OF MACHINE ........................................ 12,000 LBS EQUIPPED WITH: > CELOS MITSUBISHI ERGOline 21.5" MULTITOUCH > 8" SAMCHULLY MH-208VI 3-JAW HYDRAULIC CHUCK > IN-MACHINE TOOL PRESETTER > CHIP CONVEYOR > 4-LIVE HOLDERS

Specifications

Axes	4
Bar Work Capacity (mm)	63.5
Chuck Type	8" SAMCHULLY MH-208VI 3-JAW HYDRAULIC
Control System	CELOS MITSUBISHI ERGOline 21.5" MULTITOUCH
Machine Height (mm)	2,143.76
Machine Length (mm)	3,048
Machine Width (mm)	2,082.8
Mass (kg)	5,443.1
Max Rotary Tool Spindle Speed (RPM)	10,000
Max Spindle Speed (RPM)	5,000
Max Turning Diameter (mm)	355.6
Max Turning Length (mm)	508
Number Of Tool Stations	12
Rotary Tool Spindle Drive Motor (hp)	10.7
Shank Height For Square Tool (mm)	25.4
Spindle Motor (hp)	30
Spindle Nose Type	JIS A2-6
Swing Over Bed (mm)	924.56
Swing Over Cross Slide (mm)	754.38
Tailstock Travel (mm)	563.88
Taper Hole Of Tailstock Spindle	MT#4
X Axis Travel (mm)	259.08
Y Axis Travel (mm)	98.86
Z Axis Travel (mm)	589.04