Machine Tools·Laser Cutter

4500 WATT MITSUBISHI ML-3015 EX CO2 LASER,MFG: 2012,

Sold by Jordan Craig Machinery·Available·Last verified 4h ago

Manufacturer: Mitsubishi
Model: ML-3015 EX
Year: 2012
Condition: Used

Description

4500 WATT MITSUBISHI ML-3015 EX CO2 LASER,MFG: 2012, Processing Machine Specifications Machine Structure: X/Y Precision Rack & Pinion - Z=Precision Ball Screw Travel Drive Method: X-Y-Z simultaneous 3 axes (Z-axis height control is also possible) Maximum Workpiece Size: 120.1" x 60.0" Table Pass Height: 34.6" Processing Access: Automatic up/down door Pallet Changer: Provided X-axis Stroke: 122" Y-axis Stroke: 61" Z-axis Stroke: 5.9" Rapid Travel Speed (X,Y) inches per minute: 3940/5550 simultaneous Maximum Processing Federate, inches per minute: 1970 Positioning Precision: 0.0019/20 (X,Y), 0.0039/4 (Z) Drive Motor Type: Intelligent AC servo Maximum workpiece weight: 1540 lbs. Control System Specifications CPU: 64-bit Display Screen: 15" TFT color LCD touch screen Hard Disk: 20.0 GB Generator Output Control: Output power, frequency, duty Generator Operation Control: Beam on/off, laser gas charge, etc. Drive System: X,Y,Z simultaneous control Position Detection System: Encoder Minimum Command Input: 0.001 mm / 0.001" Program Input System: USB Computer Link, ethernet LAN Pallet Changer Specifications Drive Mechanism: Chain Pallet Change Time (Sec.): Approximate 30 Work Clamps: 2 sets on Y Axis Pallet Capacity: 1540 lbs. Applicable Machine Size: 3015 (5' x 10') CO2 Laser Specifications- 45CF-R Excitation Method: 3-axis cross flow, silent discharge Maximum Output Power: 4500-watts Rated Output Power: 4500-watts Control Method: Power feedback Power Stability: Less than +/- 1 % of rated power Beam Mode: Low-order Beam Outer Diameter: 1.02 Beam Divergence (mrad): Approximately 3.5 of less total angle Las Gas Composition (CO2:CO:N2:He): 8:4:60:28 Laser Gas Consumption Rate (liter/hour): 24 during continuous oscillation Wave Length: 10.6 microns Frequency Setting Range: 10~3000 Hz Duty Range: 0~100 percent adjustable Output Power Adjustable Range: 0~100 percent Equipped With Chiller Dust Collector

Specifications

Beam Divergence Mrad	3.5
Beam Outer Diameter (mm)	25.908
Control System Cpu	64_bit
Display Screen Size Inch	15
Drive Method	x_y_z_simultaneous_3_axes
Drive Motor Type	intelligent_ac_servo
Equipped With	chiller_dust_collector
Frequency Setting Range Hz Max	3,000
Frequency Setting Range Hz (min)	10
Hard Disk Gb	20
Laser Excitation Method	3_axis_cross_flow_silent_discharge
Laser Gas Consumption Rate Liter Hour	24
Laser Power (w)	4,500
Laser Wavelength Microns	10.6
Machine Structure	x_y_precision_rack_and_pinion_z_precision_ball_screw
Maximum Processing Feedrate (mm/min)	50,038
Maximum Workpiece Size X (mm)	3,050.54
Maximum Workpiece Size Y (mm)	1,524
Maximum Workpiece Weight (kg)	698.5
Minimum Command Input (mm)	0.001
Pallet Capacity (kg)	698.5
Pallet Change Time Sec	30
Pallet Changer	provided
Pallet Drive Mechanism	chain
Position Detection System	encoder
Positioning Precision X Y (mm)	0.048
Positioning Precision Z (mm)	0.099
Power Stability Percent	1
Processing Access	automatic_up_down_door
Program Input System	usb_computer_link_ethernet_lan
Rapid Travel Speed X Y (mm/min)	140,970
Table Pass Height (mm)	878.84
Work Clamps	2
X Axis Stroke (mm)	3,098.48
Y Axis Stroke (mm)	1,549.4
Z Axis Stroke (mm)	149.86