Machine Tools·Surface Grinder

12" x 24" OKAMOTO 1224 DX,AUTO INCR DOWNFEED,WHl dresser,FINE CHUCK,1998

Sold by Spirit Machinery·Available·Last verified 3h ago

Manufacturer: Okamoto
Model: 1224 DX
Year: 1998
Condition: Used

Description

12" x 24" OKAMOTO 1224 DX,AUTO INCR DOWNFEED,WHl dresser,FINE CHUCK,1998 "DX" SERIES PROGRAMMABLE AUTO INCREMENTAL DOWNFEED ** PROGRAMMABLE DRESS INTERVAL (ROUGH & FINE) AUTOMATIC DRESS COMPENSATION & WHEEL WEAR COMPENSATION IN AUTOMATIC CYCLE ** S/N: 64263 MFG: 1998 NOMINAL GRINDING CAPACITY ......................... 12" x 24" MAXIMUM HEIGHT UNDER 12" WHEEL .................... 13.7" TABLE SPEED, INFINITELY VARIABLE .................. UP TO 82' FPM MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL .......... 30" AUTO CROSS FEED INCREMENT ......................... 0.002" TO .80" AUTO CONINOUS CROSSFEED ........................... 4' TO 40' FPM CROSSFEED, MANUAL, HAND FEED PER REV. ............. 0.25" GRAD. OF HANDWHEEL ............. 0.001" OPTIONAL CROSS FEED KNOB, GRADUATED TO ............ 0.0001" MAX. CROSSFEED, MANUAL ............................ 14" AUTO INCREMENTAL DOWNFEED INCREMENTS .............. 0.00005" TO .0015" POWER RAPID WHEEL POSITIONING RATE ................ 16" IPM SPINDLE MOTOR ..................................... 5 H.P. WHEEL SIZE ......................... .............. 12" X 1.5" X 5" APPROX. DIMS. FOR OPERATION ....................... 107" x 76"D x 70"H APPROX. MACHINE WEIGHT ............................ 5,500 LBS. EQUIPPED WITH: "DXV" PROGRAMMABLE ELECTRONIC AUTO INCREMENTAL DOWNFEED: -SERVO DRIVEN DOWNFEED -AUTO INCREMENTAL DOWNFEED FOR BOTH SURFACE & PLUNGE OPERATIONS -DUAL RATE AUTO DOWNFEED WITH COARSE & FINE SELECTIONS -DIGITAL DISPLAY FOR BOTH CROSS & VERTICAL AXES -SPARKOUT PASSES (0 TO 5) W/AUTO TABLE PARK AT COMPLETION OF GRIND CYCLE -ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT WITH EACH GRAD. EQUIVALENT TO .00001", .0001" OR .001" -POWER RAPID WHEEL POSITIONING -FULLY AUTOMATIC GRINDING CYCLE WITH PROGRAMMABLE DRESS INTERVAL, -AUTOMATIC DRESS CYCLE WITH DRESS COMPENSATION - ALLOWING WHEEL TO BE DRESSED DURING AUTOMATIC CYCLE AT DESIRED INTERVAL. -AUTOMATIC WHEEL WEAR COMPENSATION IN AUTOMATIC CYCLE - ALLOWS FOR GREATER MACHINING ACCURACY. HYDRAULIC TABLE TRAVERSE AUTOMATIC CROSSFEED 12" X 24" FINE-DIVISION ELECTRO-MAGNETIC CHUCK VARIABLE HOLD NEUTROFIER CONTROL & DEMAGNETIZER COOLANT SYSTEM WITH PAPER FILTRATION 5 H.P. SPINDLE MOTOR/3/60/230-460 VOLTS ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE ** ** SUPERIOR CONDITION & APPEARANCE - ORIGINAL PAINT ** ** FROM A QUALITY TOOLROOM! **

Specifications

Auto Continuous Crossfeed Max Fpm	40
Auto Continuous Crossfeed Min Fpm	4
Auto Cross Feed Increment Max Inch	0.8
Auto Cross Feed Increment Min Inch	0.002
Auto Incremental Downfeed Max Inch	0.002
Auto Incremental Downfeed Min Inch	0
Chuck Length Inch	24
Chuck Type	electro_magnetic
Chuck Width Inch	12
Electronic Handwheel Resolution Min Inch	0
Grinding Capacity Length Inch	24
Grinding Capacity Width Inch	12
Handwheel Graduation Inch	0.001
Longitudinal Table Movement Max Inch	30
Machine Depth Inch	76
Machine Height Inch	70
Machine Length Inch	107
Machine Weight (kg)	2,494.758
Machine Weight (lbs)	5,500
Manual Crossfeed Hand Feed Per Rev Inch	0.25
Max Manual Crossfeed Inch	14
Maximum Height Under Wheel Inch	13.7
Optional Cross Feed Knob Graduation Inch	0
Power Rapid Wheel Positioning Rate Ipm	16
Series	DX
Sparkout Passes Max	5
Spindle Frequency (Hz)	60
Spindle Motor (hp)	5
Spindle Motor (kW)	3.729
Spindle Phase	3
Spindle Voltage (v)	230-460
Table Speed Max Fpm	82
Wheel Size Bore Inch	5
Wheel Size Diameter Inch	12
Wheel Size Width Inch	1.5