6" x 12", SUPER-TEC STP N612,HAND FEED,6" X 12" PERM CHUCK,CABLE DRIVE
- Manufacturer
- SUPER-TEC
- Model
- STP N612
- Condition
- Used
Description
6" x 12", SUPER-TEC STP N612,HAND FEED,6" X 12" PERM CHUCK,CABLE DRIVE Machine Specs: Grinding Pocket 6" x 12" Spindle Center to Table Top 15" Wheel Size 7" x 1/2" x 1-1/4" Motor 1.0 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6" x 12" Permeant Magnetic Chuck Cable Drive Auto Lube All Pictured Tooling Very Good Condition Inspect Under Power in Our Lebanon NJ Warehouse
Specifications
| Chuck Length (mm) | 304.8 |
|---|---|
| Chuck Type | permanent_magnetic |
| Chuck Width (mm) | 152.4 |
| Condition | very_good |
| Drive Type | cable |
| Feed Type | hand |
| Grinding Pocket Length (mm) | 304.8 |
| Grinding Pocket Width (mm) | 152.4 |
| Motor Phase | 3 |
| Motor Power (kW) | 0.746 |
| Motor Voltage (v) | 220 |
| Spindle Center To Table Top (mm) | 381 |
| Weight (kg) | 430.913 |
| Wheel Arbor Hole (mm) | 31.75 |
| Wheel Diameter (mm) | 177.8 |
| Wheel Width (mm) | 12.7 |
Request a quote from Spirit Machinery
Tell Spirit Machinery what you need. They'll reply directly to you.
More in Machine Tools
6" x 18", CHEVALIER FSG - 618M, 1998,
Chevalier · FSG-618M · 1998
Machine Tool Repair
20" x 40", CHEVALIER FSG-2040 ADII, 2006, OVERWHEEL DRESSER,CHUCK
Chevalier · FSG-2040 ADII · 2006
Machine Tool Repair
6" x 12", HARIG 1985,
HARIG · 1985
Standard Industrial Machinery
6" x 18", KENT K6S-618N, 1988,
KENT · K6S-618N · 1988
Standard Industrial Machinery
6" x 18", BROWN & SHARPE 618, 1966,
Brown & Sharpe · 618 · 1966
Standard Industrial Machinery
20" x 48", AMW(PROTH) GC-2048,
AMW(PROTH) · GC-2048 · 2000
Standard Industrial Machinery
