CMS 5050Y PRODUCTION LASER MARKING MACH.2-50 WATT DIODE LASERS,PARTS CONV. 2003
- Manufacturer
- CMS
- Model
- 5050Y
- Year
- 2003
- Condition
- Used
Description
CMS 5050Y PRODUCTION LASER MARKING MACH.2-50 WATT DIODE LASERS,PARTS CONV. 2003 SEE VIDEO AT: http://www.youtube.com/watch?v=xjrCu4f3g4I The machine has two 50 watt Nd:YAG diode pumped lasers each with separate water cooled power supplies made by Lee Laser. The machine will load 2 trays or parts and each tray hold 4 parts. They are fed into the machine on a conveyor and are then engraved 2 parts at a time. There a 4 Cognex cameras for part and viewing. There are 2 industrial computers running windows NT and Laser Graf v4.1 software just controlling the lasers. There is a 3rd computer to run the other aspects of the machine. Power requirements are 220 VOLT single phase, 20 amps Here is a list of some of the accessories and spare parts- ACCESSORIES Fumex vapor collector alignment laser and target vision calibration board all manuals and software SPARE PARTS two spare conveyor servos two spare miniature servos and drives spare computer for laser control QS laser driver new belting material and tools for welding belts spare trays and part holders gears, bearings, rollers for conveyor UV bulbs and power supply for distilled water. UNIT COST $250,000 WHEN NEW IN 2003
Specifications
| Cooling Type | water cooled |
|---|---|
| Laser Power Per Unit (w) | 50 |
| Laser Power Supply Manufacturer | Lee Laser |
| Laser Type | Nd:YAG diode pumped |
| Number Of Lasers | 2 |
| Number Of Trays | 2 |
| Operating System | Windows NT |
| Parts Per Cycle | 2 |
| Power Supply Amperage (a) | 20 |
| Power Supply Phase | single |
| Power Supply Voltage (v) | 220 |
| Software | Laser Graf v4.1 |
| Total Laser Power (w) | 100 |
| Tray Capacity Parts | 4 |
| Vision Cameras | 4 |
Request a quote from Spirit Machinery
Tell Spirit Machinery what you need. They'll reply directly to you.
More in Machine Tools
CHEVALIER, No. DM-323, 30 Amp, 1997,3R SYSTEM,LOW HOURS
Chevalier · DM-323 · 1997
Machine Tool Repair
78.7"X, 39.4"Y, 39.4"Z, DAHLIH HC-2000, 2016,
DAHLIH · HC-2000 · 2016
Machine Tool Repair
19" x 78" cc, LEBLOND MAKINO, 1985,INCH/METRIC THREADING, TAPER, 16" CHUCK
LeBlond Makino · 1985
Machine Tool Repair
IKEGAI GENESIS 1208, FANUC 21IT, 8"Chk,SPINDLE BORE 2,4", 2001,
IKEGAI · GENESIS 1208 · 2001
Machine Tool Repair
28.35"X, 18.11"Y, 20.8"Z, DAHLIH MCV-720, 2016,
DAHLIH · MCV-720 · 2016
Machine Tool Repair
72",84" SWING WEBSTER & BENNETT, No. EH-72, 1961,4-JAW CHUCK,5 STATION,72"UNDER
Webster & Bennett · EH-72 · 1961
Machine Tool Repair