Machine Tools·Wide Belt Sander

60" TIMESAVER model 364-1HDMW,WET,40 HP,AUTO REVERSE, 1996, REFURB, 2004

Sold by Spirit Machinery·Available·Last verified 3h ago

Manufacturer: Timesaver
Model: 364-1HDMW
Year: 1996
Condition: Used

Description

60" TIMESAVER model 364-1HDMW,WET,40 HP,AUTO REVERSE, 1996, REFURB, 2004 Wet machine Approx weight 10,000 lbs Working width 60" Sanding belt size 64" x 103" Main motor 40 HP Contact drum 11.5 " dia. Approx 45 durometer Electrics 460 volt three phase 60 Hz, full load amps 52, recommended 60-amp breaker. Compressed air supply needed 90 PSI @ 2 CFM Automatic reversing table Electronic belt tracking (super nice) Stainless steel enclosure Variable speed 20 to 40 FPM (we will run mostly at 20 FPM) Auto lube Motorized thickness adjustment, hand wheel fine adjustment) Complete pump and filtration system Other Data Motor data Name plate on machines largest motor says 208---100 Amps 460---46 amps Name plate on another smaller motor says 208---6.4 Amps 460---3.2 Amps Conveyor belt measures 64" wide Coolant uses a trimsol Measured decibels while cutting Quiet 75 dcb Replacement cost of this machine would be about $120,000 Takes five minutes to change belt with two people. AUTO reverse set up is built for only running about three feet. Jumper leads installed for longer pieces. (about 20') BOUGHT FROM REFURBISHER 2004 AND NOT USED AGAIN

Specifications

Compressed Air Flow Cfm	2
Compressed Air Pressure (kPa)	620.74
Contact Drum Diameter (mm)	292.1
Contact Drum Durometer	45
Coolant Type	trimsol
Features	automatic_reversing_table, electronic_belt_tracking, stainless_steel_enclosure, auto_lube, motorized_thickness_adjustment
Frequency (Hz)	60
Full Load Amperage (a)	52
Machine Type	wet
Main Motor Power (kW)	29.828
Noise Level Db	75
Operating Weight (kg)	4,535.9
Phase	three
Recommended Breaker Amp	60
Refurbished Year	2,004
Sanding Belt Length (mm)	2,615.2
Sanding Belt Width (mm)	1,625.6
Variable Speed Max Fpm	40
Variable Speed Min Fpm	20
Voltage (v)	460
Working Width (mm)	1,524