Forming·Angle Bending Roll

ROUNDO,20" DIAMETER ANGLE BENDING ROLL.

Sold by Spirit Machinery·Available·Last verified 3h ago

Manufacturer: ROUNDO
Model: R-13S
Condition: Used

Description

ROUNDO,20" DIAMETER ANGLE BENDING ROLL. ROUNDO R - 13S Angle Bending Roll Machine Specifications and List of Tooling and Attachments Larger than Standard Diameter Shafts on Rolls (mm vs. mm) Machine is equipped with the Shafts, Motors, and Drives that are normally found on the R-15S Model machine, but in the R-13S Frame Machine Weight is approximately 120,000 Lbs. versus 88,000 Lbs. Standard The approximate Foot Print of the Machine is 155" x 218", not including the Pit Digital Position Indicators for the (2) rear adjustable rolls Roll Bolt & CAP Assemblies are made of (3) different height sections, which are split halves and can be removed easily for quick adjustment of the assembly Beam-on-Edge Device (Hydraulically Powered), with (3) Sets of Pulling Rolls. Hydraulic Pressure Guage in clear view during operation of device. Adjustable Guide Rolls that are Hydraulically Controlled in (3) directions: Up/down: In/out(front to back); and rotating (left/right) Various Dies and Spacers including the following: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Standard se of Angle / Bar Rolling Dies (grooved for capture of Beam Flanges when rolling the Easy Way) Set of Square / Rectangular Tubing Dies Dies are reversible and made for both 3/8" and 1/2" wall tubing Various Spacer Sets used for the Rolling of Beams on Edge, Rolling Beams and Channels the Easy Way, Spacing the Dies for Bars, Tubing, etc. (7) sets of pipe rolling dies including: 8" 10" 12" 14" 16" 18" and 20" diameters. These die sets are mounted stands that are easily removable via forklift. Numerous bolts and Fasteners for the attachment of die and Spacer sets (3) Powered in-feed Rollers with Rolls made from 12" diameter x 3/4" Wall tube (4) Portable support roll-stands for supporting materials during the rolling process. Stands are hydraulically adjustable for various heights.

Specifications

Beam On Edge Device Power	hydraulic
Footprint Length (mm)	3,937
Footprint Width (mm)	5,537.2
Guide Rolls Control Directions	3
Guide Rolls Power	hydraulic
Infeed Roller Diameter (mm)	304.8
Infeed Roller Wall Thickness (mm)	19.05
Machine Weight (kg)	54,431.08
Pipe Rolling Die Diameters Inches	8, 10, 12, 14, 16, 18, 20
Pipe Rolling Dies Sets Count	7
Portable Support Roll Stands Count	4
Powered Infeed Rollers Count	3
Pulling Rolls Sets Count	3
Rear Adjustable Rolls Count	2
Roll Diameter (mm)	508
Support Stands Adjustment	hydraulic