Machine Tools·Gang Tool Lathe

HARDINGE GT-27,FANUC 18T, GANG TOOL LATHE,BAR FEED,6000 RPM, 1998

Sold by Spirit Machinery·Available·Last verified 3h ago

Manufacturer: Hardinge
Model: GT-27
Year: 1998
Condition: Used

Description

HARDINGE GT-27,FANUC 18T, GANG TOOL LATHE,BAR FEED,6000 RPM, 1998 FANUC 18T CONTROL SPECIFICATIONS: CAPACITIES: MAXIMUM DIAMETER BAR CAPACITY................ 1.062" THREADING DIAMETER........................... 9.1" FIXTURE DIAMETER............................. 6" SWING OVER WAY COVER......................... 11.76" SWING OVER TOOLING TOP PLATE................. 2.654" COLLET SYSTEM................................ 5C COLLET CLOSER STROKE......................... 0.5" MAXIMUM ALLOABLE WEIGHT ON SPINLE............ 75 LBS DISTANCE SPINDLE FACE TO TOP PLATE........... 11.259" SPINDLE: SPEED........................................ 6,000 RPM NOSE......................................... A2-4 MOTOR........................................ 5 HP TORQUE....................................... 17.4 FT-LB SPINDLE CENTERING HEIGHT..................... 42.25" TRAVELS: X AXIS...................................... 11.968" Z AXIs...................................... 11.062" RAPID TRAVERSE RATES X AXIS...................................... 472 IPM Z AXIX...................................... 630 IPM TOOLS (GANG TYPE): NUMBER OF TOOL POSITIONS.................... PART DEPENDENT SQUARE SHANK TOOL SIZE (MAXIMUM)............ 0.5" ROUND SHANK TOOL SIZE (MAXIMUM)............. 0.75" GENERAL: ELECTRICAL REQUIREMENTS..................... 230 / 60 / 3 MACHINE DIMENSIONS (L x W x H).............. 70" x 58.7" x 62" MACHINE WEIGHT (APPROXIMATE)................ 5,700 LBS EQUIPPED WITH: HAROMATIC SINGLE TUBE HYDRAUILIC BAR FEED PARTS CATCHERPARTS COUNTER *** MACHINE IS UNDER POWER IN A WEST COAST PLANT ***

Specifications

Accessories	parts catcher, parts counter
Bar Feed Type	Haromatic single tube hydraulic
Collet Closer Stroke (mm)	12.7
Collet System	5C
Control	Fanuc 18T
Distance Spindle Face To Top Plate (mm)	285.88
Electrical Frequency (Hz)	60
Electrical Phase	3
Electrical Voltage (v)	230
Fixture Diameter (mm)	152.4
Machine Height (mm)	1,574.8
Machine Length (mm)	1,778
Machine Weight (kg)	2,585.243
Machine Width (mm)	1,490.92
Maximum Allowable Weight On Spindle (kg)	34.019
Maximum Diameter Bar Capacity (mm)	26.975
Maximum Round Shank Tool Size (mm)	19.05
Maximum Square Shank Tool Size (mm)	12.7
Motor Power (kW)	3.728
Spindle Centering Height (mm)	1,073.15
Spindle Nose	A2-4
Spindle Speed (RPM)	6,000
Spindle Torque Nm	23.576
Swing Over Tooling Top Plate (mm)	67.436
Swing Over Way Cover (mm)	298.45
Threading Diameter (mm)	231.14
X Axis Rapid Traverse Rate Mm Per (min)	11,989.68
X Axis Travel (mm)	303.93
Z Axis Rapid Traverse Rate Mm Per (min)	16,002
Z Axis Travel (mm)	280.97