Machine Tools·Cnc Turning Center

OKUMA LU-35 4-Axis CNC Turning Center, OSP-7000 Control, 12/10-Pos Dual Turret

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: OKUMA
Model: LU-35
Condition: Used

Description

OKUMA LU-35 4-Axis CNC Turning Center, OSP-7000 Control, 12/10-Pos Dual Turret MODEL NUMBER: LU-35 TEMPORARY SPECIFICATIONS: Swing: 29.13" Swing Over Saddle: 18.90" Centers: 33.46" Turning Diameter x Length, Max.: 21.65" x 36.22" Spindle Speeds, 4 Steps: 14 to 3200 RPM Spindle Bore: 3.94" Spindle Nose Type: JIS A2-8 Carriage Travel, Upper Turret, X-Axis: 10.83" + 4.13" Carriage Travel, Lower Turret, X-Axis: 7.09" + 2.76" Feed Rate, X-Axis: .00001 to 39.37 IPM Rapids, X-Axis: 591 IPM Carriage Traverse, Upper Turret, Z-Axis: 36.22" Carriage Traverse, Lower Turret, Z-Axis: 34.45" Feed Rate, Z-Axis: .00001 to 39.37 IPM Rapids, Z-Axis: 787 IPM Tailstock Quill Diameter: 3.54" Tailstock Quill Travel: 6.69" Tailstock Taper: MT No. 5 Electrics: 220/440 EQUIPPED WITH: OSP-7000 Control Chip Conveyor, Right-Side Discharge 24" Rohm 3-Jaw Chuck Conventional 4-Axis Programming Steps and Language OSP Makes the Conversions for the Lower Turret 1" Square and 2" Round Tool Shank Size 2" A2-8 Spindle Nose 1,000 PSI Hi-Pressure Coolant System Dual Turret with 12-Tool Positions on Upper and 10-Tool Positions on Lower MOTOR DATA: 50/40 HP OVERALL DIMENSIONS: 179" L x 101" W x 102" High WEIGHT: 20,900 Lbs. CONDITION: Very Good, Installed and Under Power

Specifications

Axes	4
Carriage Travel Lower Turret X Axis (mm)	219.964
Carriage Travel Upper Turret X Axis (mm)	274.828
Carriage Traverse Lower Turret Z Axis (mm)	874.938
Carriage Traverse Upper Turret Z Axis (mm)	919.988
Centers (mm)	849.884
Chuck Size Inches	24
Condition	Very Good
Control	OSP-7000
Coolant System Pressure (kPa)	6,894.8
Coolant System Pressure (psi)	1,000
Feed Rate X Axis Max Mm Per (min)	999.998
Feed Rate X Axis Min Mm Per (min)	0.003
Feed Rate Z Axis Max Mm Per (min)	999.998
Feed Rate Z Axis Min Mm Per (min)	0.003
Lower Turret Tool Positions	10
Motor Power (hp)	50
Motor Power (kW)	37.285
Overall Height (mm)	2,590.8
Overall Length (mm)	4,546.6
Overall Width (mm)	2,564.4
Rapids X Axis Mm Per (min)	15,012.34
Rapids Z Axis Mm Per (min)	19,990.98
Spindle Bore (mm)	100.076
Spindle Nose Type	JIS A2-8
Spindle Speed Max (RPM)	3,200
Spindle Speed Min (RPM)	14
Swing (mm)	739.902
Swing Over Saddle (mm)	479.806
Tailstock Quill Diameter (mm)	89.916
Tailstock Quill Travel (mm)	169.926
Tailstock Taper	MT No. 5
Turning Diameter Max (mm)	549.91
Turning Length Max (mm)	919.988
Upper Turret Tool Positions	12
Voltage (v)	220/440
Weight (kg)	9,480.543