Machine Tools·Tube Bender

6" AMOB CNC Multistack Tube Bender, 400mm Centerline Radius, 2,700 Hours, 2019

Sold by Bass Machinery·Available·Last verified 4h ago

Manufacturer: AMOB
Model: eMOB150
Year: 2019
Condition: Used

Description

6" AMOB CNC Multistack Tube Bender, 400mm Centerline Radius, 2,700 Hours, 2019 AGE: 2019 MODEL NUMBER: eMOB150 SPECIFICATIONS: Max. Bend O.D. x Thick, 40ksi Material Max.: 150mm x 3mm Centerline Bending Radius, Max.: 400mm Useful Length, Max.: From Main Shaft to POB: 4000mm From Main Shaft to Mandrel Extractor: 7000mm Bending Angle, Max.: 180 Degrees + 10 Degrees Standard Bending Direction: Right Positioner Pass Through O.D., Max.: 152mm Useful Stack Height: 390mm Die Tool Diameter: 120mm Working Height: 1570mm Pneumatic System Requirements: 6 Bar Frequency: 47 to 63 Hz Power Phase: 3 Installed Power: 68kVA CNC Power Supply Voltage: 24 DC Enclosure Protection Degree: IP 55 Ambient Temperature: 5 to 40 Degrees C Relative Humidity: 5% to 75% Hours, Machine On: 2,700 EQUIPPED WITH: PC CNC Control Unit Equipped with Industrial Grade PC: LCD Monitor, 19" Screen, Data Input Over Touch Screen High Speed SSD Hard Drive Windows 10 Enterprise "NJ Series" Real Time Operating System Powerful Motion Control Platform from OMRON Free Storage of 40GB (Approx. 4 Million Parts) Parts Explorer Ethernet Connection COM, DVI and Display Ports 5 USB, 1 Side Connection and 4 Internal All Electric Vertical CNC Pressure Die Assist Increased Programmable Carriage Booster Former Die Withdrawing System Wiper Die Support Stack Automatic Wiper Die Lubrication Automatic Spring Back Verification / Correction Automatic Mandrel Lubrication Laser Scanner CE Manual Centralized Lubrication Tooling COST WHEN NEW APPROXIMATELY $575,000 Plus Tooling OVERALL DIMENSIONS: 392" x 103" x 84" High WEIGHT: 66,000 Lbs. CONDITION: Never Used in Production

Specifications

Ambient Temperature Max (c)	40
Ambient Temperature Min (c)	5
Centerline Bending Radius Max (mm)	400
Cnc Monitor Screen Inches	19
Cnc Power Supply Voltage Dc	24
Condition	never used in production
Die Tool Diameter (mm)	120
Enclosure Protection Degree	IP55
Frequency Hz Max	63
Frequency Hz (min)	47
Installed Power (kVA)	68
Machine Hours	2,700
Material Strength Ksi	40
Max Bend Od (mm)	150
Max Bend Thickness (mm)	3
Max Bending Angle Degrees	190
Operating System	Windows 10 Enterprise
Overall Height (mm)	2,133.6
Overall Length (mm)	9,956.48
Overall Width (mm)	2,615.4
Pneumatic System Pressure (bar)	6
Positioner Pass Through Od Max (mm)	152
Power Phase	3
Relative Humidity Max Percent	75
Relative Humidity Min Percent	5
Standard Bending Direction	right
Storage Capacity Gb	40
Useful Length Main Shaft To Mandrel Extractor (mm)	7,000
Useful Length Main Shaft To Pob (mm)	4,000
Useful Stack Height (mm)	390
Weight (kg)	29,937.24
Working Height (mm)	1,570