12-Stand CONTOUR Roll Former, 2" Spdl, 10" RS, 12" H, 5.5" to 7" V, 20 HP
- Manufacturer
- CONTOUR
- Model
- 201210-0H
- Condition
- Used
Description
12-Stand CONTOUR Roll Former, 2" Spdl, 10" RS, 12" H, 5.5" to 7" V, 20 HP MODEL NUMBER: 201210-0H SPECIFICATIONS: Equal Geared Spindle Diameter: 2" with 3/8" Key Roll Space: 10" Horizontal Center: 12" Vertical: 5.5" to 7" Floor to Top of Base: 35" I-Beam Base, 27" Without Base to Centerline of Lower Shaft: 7" Direction: Right-to-Left Tooled for Part, Approx.: 3" x 1" x 1-1/4" x 16 Ga. LCS EQUIPPED WITH: 3-Axis Exit Straightener Vari-Speed AC Drive MOTOR DATA: 20 HP, 440/3 OVERALL DIMENSIONS: 184" x 78" x 85" High CONDITION: Very Good, Taken Directly from Service
Specifications
| Base To Centerline Of Lower Shaft Inches | 7 |
|---|---|
| Condition | very_good |
| Direction | right_to_left |
| Drive Type | vari_speed_ac |
| Exit Straightener Axes | 3 |
| Floor To Top Of Base Inches | 35 |
| Horizontal Center Inches | 12 |
| Number Of Stands | 12 |
| Overall Height Inches | 85 |
| Overall Length Inches | 184 |
| Overall Width Inches | 78 |
| Phase | 3 |
| Power (hp) | 20 |
| Roll Space Inches | 10 |
| Spindle Diameter Inches | 2 |
| Vertical Range Max Inches | 7 |
| Vertical Range Min Inches | 5.5 |
| Voltage (v) | 440 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Forming
ENGEL MODEL 800 ROLL FORMER, S-CLEAT, DRIVE CLEAT AND PITTSBURGH
Engel · 800
Spirit Machinery
NATIONAL No. NR4816,16 gauge,48 1/4" rolls x 3",18 rpm, manual rool adjustment
National · NR4816
Spirit Machinery
12-Stand PROMA Roll Former, 1-1/2" Spdl, 9" RS, 12" Horiz, 5.5" - 8" Vert
PROMA · 121509
Bass Machinery
10-Stand TISHKEN Roll Former, 1.5" Spdl, 10" RS, 9" Horiz, 4" - 6.5" Vert, 15 HP
TISHKEN · 10HMW1-1/2
Bass Machinery
10-Stand PEARSON Roll Former, 1.5" Spdl, 8.5" RS, 8" Horiz, 1" Vert, 10 HP
PEARSON
Bass Machinery
Roll Formers, Built To Order
Bass Machinery
