Coil Processing·Tube Mill

3" x .134" AEF Tube Mill, Right-to-Left

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: AEF
Model: E-300
Condition: Used

Description

3" x .134" AEF Tube Mill, Right-to-Left MODEL NUMBER: E-300 SPECIFICATIONS: Tube Diameter: 3/4" to 3" Wall Thickness: .035" to .134" D/T Ratio: 10:1 to 60:1 Material Yield, Max.: 50,000 PSI Mill Speed, Max.: 300 FPM, Max. Gear in Speed, No Load Driven Spindle Diameter: 2.5" Line Direction: Right to Left CONSISTING OF: Forming Mill: (1) Entry Guide Unit with Edge Conditioning (4) Driven Breakdown Stands (6) Idle Side Roll Units (3) Driven Fin Stands Welding Section: Guide Roll Unit 3-Roll Weld Pressure Unit Bead Winder Roto Scarf Unit Ironing Stand Sizing Mill: (4) Driven Sizing Stands (4) Idle Side Roll Units (2) Single-Sided 4-Roll Turksheads 20' Run Out Table Electrical: Drive Cabinet Push Button Station Tooling: 2-3/4" x 1 Rectangle MOTOR DATA: 75 HP Forming 60 HP Sizing

Specifications

Breakdown Stands	4
Driven Spindle Diameter (mm)	63.5
Dt Ratio Max	60
Dt Ratio (min)	10
Fin Stands	3
Forming Motor (hp)	75
Forming Motor (kW)	55.928
Idle Side Roll Units Forming	6
Idle Side Roll Units Sizing	4
Line Direction	right_to_left
Material Yield Max (psi)	50,000
Mill Speed Max Fpm	300
Runout Table Length (ft)	20
Sizing Motor (hp)	60
Sizing Motor (kW)	44.742
Sizing Stands	4
Tooling Rectangle Height (mm)	25.4
Tooling Rectangle Width (mm)	69.85
Tube Diameter Max (mm)	76.2
Tube Diameter Min (mm)	19.05
Turksheads	2
Wall Thickness Max (mm)	3.404
Wall Thickness Min (mm)	0.889